{"title":"Suspension \u0026 Handling","description":null,"products":[{"product_id":"megan-racing-bmw-e46-spec-rs-coilovers-mr-cdk-e46-rs","title":"Megan Racing Spec-RS Coilovers – BMW E46 3 Series RWD 1999–2005 – MR-CDK-E46-RS","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E46-RS Spec-RS Coilover Kit is the track-focused suspension option for compatible BMW E46 3 Series models, providing a much greater level of suspension tuning than Megan Racing’s Euro-series kits. External reservoirs increase oil capacity and allow separate compression and rebound adjustment, helping maintain more consistent damping during sustained high-load and circuit driving.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe system features 32 levels of damper adjustment, full-length ride-height adjustment and pillow-ball front upper mounts with camber plates. Separate spring-perch and shock-length adjustment allows vehicle height to be tuned independently of spring preload, while the external-reservoir design provides additional control for performance suspension setup and corner balancing.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eRWD non-M E46 applications only. Excludes AWD\/xi and E46 M3. Megan Japan also specifically states that 318i Touring\/Wagon models are not compatible.\u003c\/strong\u003e Megan Racing notes that the Spec-RS system \u003cstrong\u003ecannot be adjusted back to factory ride height and is designed to lower the vehicle significantly\u003c\/strong\u003e, which should be considered for road clearance and wheel\/tyre fitment. Reservoir-equipped dampers require careful adjustment; Megan Japan warns that incorrect handling of the oil-line connection during ride-height adjustment can damage the damper. \u003cstrong\u003eProfessional installation and setup by an experienced suspension workshop is strongly recommended\u003c\/strong\u003e, followed by final torque checks, clearance checks and a complete wheel alignment. Megan Racing specifies its products as \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54682654671127,"sku":"MR-CDK-E46-RS","price":2003.23,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e46-rs-1.jpg?v=1786666598"},{"product_id":"megan-racing-bmw-e46-euro-ii-coilovers-mr-cdk-e46","title":"Megan Racing Euro II Coilovers – BMW E46 3 Series RWD 1999–2005 – MR-CDK-E46","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E46 Euro II Coilover Kit is designed for BMW E46 3 Series owners wanting a more performance-focused suspension setup with adjustable ride height, damping and front camber. Compared with the Euro I version, the Euro II system adds camber-adjustable front upper mounts for greater alignment control and suspension tuning.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers provide consistent damping response, while 32-way simultaneous compression and rebound adjustment allows ride firmness and handling characteristics to be fine-tuned. Full-length adjustment allows ride height changes while retaining usable damper stroke, with the rear spring height and shock length independently adjustable.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eCompatible with non-M, RWD E46 3 Series applications only. Does not fit E46 M3; Megan Racing offers the dedicated MR-CDK-E46M3 kit. AWD\/325xi\/330xi applications are not compatible with this SKU.\u003c\/strong\u003e Megan Racing application years are primarily US-market references, so Australian model years may differ. Professional installation, final torque checks and a complete wheel alignment are strongly recommended. Megan Racing states its suspension components are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and are not necessarily completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54682655785239,"sku":"MR-CDK-E46","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e46-1.jpg?v=1786666687"},{"product_id":"riaction-bmw-e46-rwd-coilovers-ri-bm-008-lt","title":"Riaction Performance Coilovers – BMW E46 3 Series RWD Non-M 1999–2005 – RI-BM-008-LT","description":"\u003cp\u003e\u003cstrong\u003eThe Riaction Performance RI-BM-008-LT Coilover Kit is designed for rear-wheel-drive, non-M BMW E46 3 Series models, providing adjustable ride height, increased suspension control and improved handling while retaining a street-oriented level of comfort. Riaction's monotube damper design combines durable carbon-steel shock bodies with precision-machined aluminium components for consistent performance and long-term serviceability.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFull-length ride-height adjustment allows the vehicle's stance to be changed while retaining usable damper travel, while 32 levels of damping adjustment provide control over ride firmness and handling response. The standard BM-008-LT kit uses matched 8K front and 8K rear SAE9254 cold-wound springs and is fully rebuildable through Riaction Performance Shocks.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eNon-M and RWD applications only. Does not fit E46 M3 or XI\/AWD models. Riaction manufactures the separate BM-028-LT specifically for E46 AWD models.\u003c\/strong\u003e Confirm chassis and drivetrain before ordering. Professional installation, final hardware torque checks and a complete wheel alignment are recommended after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54682662568215,"sku":"RI-BM-008-LT","price":1503.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/RI-BM-008-LT.jpg?v=1786667636"},{"product_id":"megan-racing-bmw-e46-euro-i-coilovers-mr-cdk-e46-eu","title":"Megan Racing Euro I Coilovers – BMW E46 3 Series RWD 1999–2005 – MR-CDK-E46-EU","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E46-EU Euro I Coilover Kit is designed for BMW E46 3 Series owners wanting adjustable ride height and improved suspension control while retaining a more comfortable, street-oriented ride. The Euro I setup uses softer spring rates and rubber-isolated front top mounts to reduce additional road noise and vibration compared with Megan Racing’s more aggressive Euro II and Spec-RS systems.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers separate the damper oil from the high-pressure nitrogen chamber for consistent response, while full-length ride-height adjustment allows vehicle height to be changed without unnecessarily reducing available damper stroke. 32-way simultaneous compression and rebound adjustment provides additional control over ride firmness and handling response.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eFor minimum fitment risk, Fuji Euro Parts recommends this kit for non-M, RWD E46 applications only. E46 M3 models require the dedicated MR-CDK-E46M3-EU kit. AWD\/325xi\/330xi fitment is not guaranteed due conflicting exact-part application data and should be confirmed before ordering.\u003c\/strong\u003e Megan Racing application years are primarily US-market references, so Australian-delivered model years may vary. Professional installation, final hardware torque checks and a complete wheel alignment are strongly recommended. Megan Racing states that its suspension components are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and may not be completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54682669482263,"sku":"MR-CDK-E46-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e46-eu-1.jpg?v=1786668018"},{"product_id":"megan-racing-bmw-e46-lowering-springs-mr-ls-be46","title":"Megan Racing Euro Version Lowering Springs – BMW E46 3 Series RWD 1999–2005 – MR-LS-BE46","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-LS-BE46 Euro Version Lowering Springs are designed to lower compatible BMW E46 3 Series models by approximately 38.1mm front and rear, giving the vehicle a lower stance while improving chassis response and reducing body roll. The springs are designed as direct replacements for the factory components and retain a street-oriented balance between handling performance and ride comfort.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eManufactured from SAE 9254 cold-wound steel with a phosphate powder-coated finish, the springs are designed for high tensile strength, corrosion resistance and resistance to premature sagging. The matched front and rear lowering amount maintains a balanced appearance while lowering the vehicle's centre of gravity.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eRWD applications only. Does not fit XI\/xDrive\/AWD models.\u003c\/strong\u003e For minimum fitment risk, \u003cstrong\u003eE46 M3, Touring\/Wagon and Convertible applications should be confirmed before ordering\u003c\/strong\u003e, as exact-part reseller data conflicts on those variants while Megan Racing's current US page only broadly specifies E46 3 Series RWD. Actual lowering amount may vary depending on vehicle weight, existing suspension condition and chassis configuration. Professional installation and a wheel alignment are recommended after installation. Megan Racing designates its suspension products \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54682689700119,"sku":"MR-LS-BE46","price":236.78,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-ls-be46-1.jpg?v=1786668643"},{"product_id":"megan-racing-bmw-e36-spec-rs-coilovers-mr-cdk-e36-rs","title":"Megan Racing Spec-RS Coilovers – BMW E36 3 Series \/ M3 1992–1998 – MR-CDK-E36-RS","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E36-RS Spec-RS Coilover Kit is the track-focused suspension option for the BMW E36 platform, designed for drivers requiring greater damping control and consistency during aggressive driving and circuit use. The Spec-RS system uses external reservoirs to increase oil capacity and provides separate compression and rebound adjustment for more precise suspension tuning than Megan Racing’s Euro-series E36 coilovers.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe kit features 8K front and 12K rear springs, 32 levels of damping adjustment, full-length ride-height adjustment and pillow-ball upper mounting with front camber adjustment. Separate spring-perch and damper-length adjustment allows ride height to be tuned without relying solely on spring preload, while the external-reservoir arrangement is designed to maintain more consistent damping during sustained high-load driving.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eFits BMW E36 3 Series and E36 M3 applications from 1992–1998. 318ti Compact fitment is not specifically confirmed and should be verified before ordering due to its different rear suspension layout.\u003c\/strong\u003e This is a highly adjustable motorsport-oriented suspension system; incorrect reservoir, ride-height or damping adjustment can damage components. Megan Racing Japan specifically warns that damage can occur if the oil-line connection is not correctly handled during height adjustment. \u003cstrong\u003eProfessional installation and setup by an experienced suspension workshop is strongly recommended\u003c\/strong\u003e, followed by final torque checks and a complete wheel alignment. Megan Racing states its products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687236686103,"sku":"MR-CDK-E36-RS","price":2003.23,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e36-rs-1.jpg?v=1786757367"},{"product_id":"megan-racing-bmw-f30-f32-5-stud-coilovers-mr-cdk-bf30-v2","title":"Megan Racing Euro II Coilovers – BMW F30\/F32 RWD 5-Stud – MR-CDK-BF30-V2","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-BF30-V2 Euro II Coilover Kit is designed for compatible BMW F30 3 Series and F32 4 Series models equipped with the 5-stud front strut mounting configuration. The Euro II system provides adjustable ride height, damping and front camber adjustment for improved suspension response, chassis control and alignment tuning.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers provide consistent damping performance, while 32-way simultaneous compression and rebound adjustment allows the suspension firmness to be fine-tuned. Full-length adjustment allows ride height changes while retaining usable damper stroke, and camber-adjustable pillow-ball front top mounts provide additional front alignment control.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003e5-stud front strut and RWD applications only. Vehicles with the 3-stud front strut configuration require MR-CDK-BF30 instead. Excludes M3\/M4 applications, which use Megan Racing’s dedicated F80\/F82 coilover kits.\u003c\/strong\u003e Physically confirm the front top-hat bolt pattern before ordering rather than relying solely on model year. The factory rear upper mounts must be reused. Professional installation, final hardware torque checks and a complete wheel alignment are strongly recommended. Megan Racing states its suspension components are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and may not be completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687236849943,"sku":"MR-CDK-BF30-V2","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bf30-v2_2.jpg?v=1786757388"},{"product_id":"megan-racing-bmw-e92-euro-ii-coilovers-mr-cdk-e92","title":"Megan Racing Euro II Coilovers – BMW E92 3 Series Coupe RWD 2006–2012 – MR-CDK-E92","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E92 Euro II Coilover Kit is designed for rear-wheel-drive BMW E92 3 Series Coupes, providing adjustable ride height, damping and front camber adjustment for improved suspension response and greater control over vehicle stance and alignment. The 8K front and 12K rear spring rates provide a more performance-focused setup while remaining suitable for street and spirited driving applications.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe monotube dampers separate the shock oil and high-pressure gas chamber for consistent damping response, while full-length adjustment allows ride height to be changed without unnecessarily reducing available damper stroke. 32-way simultaneous compression and rebound adjustment allows the suspension firmness and response to be fine-tuned to suit different driving conditions.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eE92 Coupe and RWD only. Does not fit XI\/xDrive AWD models. E92 M3 is not compatible and uses Megan Racing’s dedicated MR-CDK-E92M3 coilover kit.\u003c\/strong\u003e Megan Racing application years are primarily US-market references, so Australian-delivered years may vary slightly. Professional installation, final torque checks and a complete wheel alignment are strongly recommended. Megan Racing states its suspension products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and that components may not be completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687236882711,"sku":"MR-CDK-E92","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e92-1.jpg?v=1786757406"},{"product_id":"megan-racing-bmw-e90-euro-ii-coilovers-mr-cdk-e90","title":"Megan Racing Euro II Coilovers – BMW E90 3 Series Sedan RWD 2006–2011 – MR-CDK-E90","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E90 Euro II Coilover Kit is designed for rear-wheel-drive BMW E90 3 Series Sedans, providing adjustable ride height, damping and front camber adjustment for a more responsive and tuneable suspension setup. The Euro II system uses pillow-ball front top mounts and firmer spring rates than the comfort-oriented Euro I version, making it the more performance-focused option of the two.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers provide consistent damping performance, while 32-way simultaneous compression and rebound adjustment allows suspension firmness to be fine-tuned. Full-length adjustment enables ride height changes while retaining available suspension stroke, and the rear spring height and shock length can be adjusted independently.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eE90 Sedan and RWD only. Does not fit XI\/xDrive AWD models. E90 M3 should use Megan Racing’s dedicated E9x M3 coilover kit and is not recommended for this application.\u003c\/strong\u003e Megan Racing application years are primarily US-market references, so Australian-delivered years may vary. Professional installation, final torque checks and a complete wheel alignment are strongly recommended. Megan Racing classifies its suspension products as \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687237013783,"sku":"MR-CDK-E90","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e90-1.jpg?v=1786757452"},{"product_id":"megan-racing-bmw-e36-euro-ii-coilovers-mr-cdk-e36","title":"Megan Racing Euro II Coilovers – BMW E36 3 Series \/ M3 1992–1998 – MR-CDK-E36","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E36 Euro II Coilover Kit is designed for BMW E36 3 Series and E36 M3 applications, providing adjustable ride height, damping and front camber for a more responsive and tuneable suspension setup. Compared with the softer Euro I kit, the Euro II uses an 8K front \/ 8K rear spring setup together with pillow-ball front top mounts for a more performance-focused feel and greater alignment control.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe monotube dampers feature 32-way simultaneous compression and rebound adjustment, while full-length adjustment allows ride height to be changed while retaining usable damper stroke. Rear spring height and rear shock length can also be adjusted independently, and the front pillow-ball mounts provide camber adjustment for further suspension tuning.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eE36 318ti Compact\/Hatchback is not compatible — Megan Racing supplies the separate MR-CDK-E36TI kit specifically for that model.\u003c\/strong\u003e There is older exact-part documentation limiting MR-CDK-E36 to 6-cylinder E36 models, while Megan Racing’s current manufacturer page simply lists E36 3 Series and M3. For minimum fitment risk, Fuji Euro Parts recommends confirming 4-cylinder non-318ti applications before ordering. Megan Racing application years are primarily US-market references, so Australian model years may vary. Professional installation, final torque checks and a complete wheel alignment are strongly recommended. Megan Racing states its suspension products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and that components may not be fully torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687237112087,"sku":"MR-CDK-E36","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-be36-1.jpg?v=1786757499"},{"product_id":"megan-racing-bmw-e30-51mm-coilovers-mr-cdk-e3051","title":"Megan Racing Euro II Coilovers – BMW E30 51mm Front Strut – MR-CDK-E3051","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E3051 Euro II Coilover Kit is designed for BMW E30 models equipped with the larger 51mm front strut housing. The kit provides adjustable ride height, 32-way damping and front camber adjustment, allowing the suspension to be tuned for vehicle stance, handling response and alignment requirements.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers provide consistent damping performance, while full-length adjustment allows ride height to be altered while retaining usable suspension stroke. Camber-adjustable pillow-ball front top mounts provide additional front alignment adjustment, and the rear spring height and shock length can be adjusted independently.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003e51mm front strut housing ONLY. Physically measure the front strut housing before ordering.\u003c\/strong\u003e Megan Racing specifies this kit for \u003cstrong\u003e1984–1991 6-cylinder E30 models and 1990–1991 4-cylinder E30 models with the 51mm housing.\u003c\/strong\u003e Exact-part installation documentation also states that the \u003cstrong\u003efactory front spindles must be reused and the front strut assemblies require TIG or MIG welding\u003c\/strong\u003e, so installation should be carried out by a qualified suspension\/fabrication workshop. A wheel alignment and final torque\/clearance inspection are required after installation. Megan Racing states its products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and components are not completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687237374231,"sku":"MR-CDK-E3051","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e3051-1.jpg?v=1786757526"},{"product_id":"megan-racing-bmw-e30-318i-45mm-coilovers-mr-cdk-e3045","title":"Megan Racing Euro II Coilovers – BMW E30 318i 45mm Front Strut – MR-CDK-E3045","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E3045 Euro II Coilover Kit is designed specifically for early BMW E30 318i models equipped with the smaller 45mm front strut housing. The system provides adjustable ride height, damping and front camber adjustment for improved suspension response and greater control over vehicle stance and alignment.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers provide consistent damping performance, while 32-way simultaneous compression and rebound adjustment allows the suspension firmness to be fine-tuned. Camber-adjustable pillow-ball front top mounts provide additional front alignment adjustment, while the rear spring height and shock length can be adjusted independently.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003e45mm front strut housing ONLY. Do not order based on E30 chassis alone — physically measure the front strut housing before purchase. Megan Racing lists the larger 51mm E30 application separately as MR-CDK-E3051. Installation requires reuse of the OEM front spindle assemblies and welding of the front strut components; TIG or MIG welding is specified in exact-part installation documentation. Installation should therefore be performed by a suitably qualified suspension\/fabrication workshop.\u003c\/strong\u003e A wheel alignment, final torque inspection and clearance check are required after installation. Megan Racing suspension products are intended for \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687237538071,"sku":"MR-CDK-E3045","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e3045-1.jpg?v=1786757544"},{"product_id":"megan-racing-bmw-f30-f32-euro-ii-coilovers-mr-cdk-bf30","title":"Megan Racing Euro II Coilovers – BMW F30\/F32 RWD 3-Stud – MR-CDK-BF30","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-BF30 Euro II Coilover Kit is designed for compatible rear-wheel-drive BMW F30 3 Series and F32 4 Series models using the 3-stud front strut mounting configuration. The Euro II system combines adjustable ride height, damping and front camber adjustment to provide improved chassis response while retaining a setup suitable for street-oriented performance use.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers separate the shock oil from the high-pressure nitrogen chamber for consistent damping response, while the full-length adjustable design allows ride height to be altered without unnecessarily reducing available damper stroke. The kit uses 6K front and 12K rear springs with 32-way simultaneous compression and rebound adjustment.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eRWD and 3-stud front top-hat vehicles only. Does not fit xDrive\/AWD. Excludes M3 and vehicles equipped with M Suspension \/ EDC.\u003c\/strong\u003e Vehicles with the \u003cstrong\u003e5-stud front strut configuration require MR-CDK-BF30-V2 instead.\u003c\/strong\u003e Confirm the physical front strut mounting pattern before ordering rather than relying on model year alone. Professional installation, final hardware torque checks and a complete wheel alignment are strongly recommended. Megan Racing states its products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and components may not be completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687237701911,"sku":"MR-CDK-BF30","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bf30.jpg?v=1786757571"},{"product_id":"riaction-bmw-e36-coilovers-ri-bm-010-lt","title":"Riaction Performance Coilovers – BMW E36 3 Series Non-M 1992–1998 – RI-BM-010-LT","description":"\u003cp\u003e\u003cstrong\u003eThe Riaction Performance RI-BM-010-LT Coilover Kit is designed for non-M BMW E36 3 Series models, providing adjustable ride height, increased suspension control and sharper handling while maintaining a street-oriented ride. Riaction uses a monotube damper design with precision-machined aluminium components and an electroplated carbon-steel shock body for durability and consistent damping performance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFull-length ride-height adjustment allows the vehicle stance to be changed while retaining usable damper travel, while 32 levels of damping adjustment allow the suspension response to be fine-tuned for daily driving, spirited road use or a firmer performance setup. The standard kit uses matched 8K front and 8K rear SAE9254 cold-wound springs and is fully rebuildable through Riaction Performance Shocks.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eNon-M E36 applications only. Does not fit E36 M3 — Riaction manufactures a separate BM-034-LT kit specifically for E36 M3 models.\u003c\/strong\u003e Fitment for the \u003cstrong\u003e318ti Compact is not clearly confirmed by Riaction\u003c\/strong\u003e, and because the Compact uses a different rear suspension layout, Fuji Euro Parts recommends \u003cstrong\u003enot ordering this kit for a 318ti unless compatibility is confirmed first\u003c\/strong\u003e. Professional installation, final hardware torque checks and a complete wheel alignment are recommended after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687238029591,"sku":"RI-BM-010-LT","price":1503.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/RI-BM-010-LT.jpg?v=1786757620"},{"product_id":"riaction-bmw-e90-rwd-coilovers-ri-bm-003-lt","title":"Riaction Performance Coilovers – BMW E90 3 Series RWD 2006–2011 – RI-BM-003-LT","description":"\u003cp\u003e\u003cstrong\u003eThe Riaction Performance RI-BM-003-LT Coilover Kit is designed specifically for rear-wheel-drive BMW E90 3 Series models, providing adjustable ride height, increased suspension control and improved handling while retaining a street-focused level of comfort. Riaction uses a monotube damper design with high-quality carbon-steel and aluminium components for consistent damping performance and durability.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFull-length ride-height adjustment allows the vehicle stance to be changed independently of damper stroke, while 32 levels of damping adjustment allow the suspension response to be fine-tuned from softer street settings through to firmer performance setups. The kit uses 8K front and 12K rear SAE9254 cold-wound springs and is fully rebuildable through Riaction Performance Shocks.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eBMW E90, non-M and RWD only. Does not fit M3 or XI\/xDrive\/AWD models.\u003c\/strong\u003e Confirm chassis and drivetrain before ordering. Coilover installation significantly alters suspension geometry and ride height, so professional installation, final hardware torque checks and a complete wheel alignment are strongly recommended before vehicle use.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687238783255,"sku":"RI-BM-003-LT","price":1503.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/RI-BM-003-LT.jpg?v=1786757676"},{"product_id":"riaction-bmw-f30-f32-rwd-coilovers-ri-bm-001-lt","title":"Riaction Performance Coilovers – BMW F30\/F32 RWD – RI-BM-001-LT","description":"\u003cp\u003e\u003cstrong\u003eThe Riaction Performance RI-BM-001-LT Coilover Kit is designed for compatible rear-wheel-drive BMW F30 3 Series and F32 4 Series models, providing adjustable ride height, increased suspension control and a more responsive handling setup while retaining a street-oriented ride. The monotube damper design uses quality carbon-steel and aluminium components for consistent damping and durability.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFull-length ride-height adjustment allows the vehicle stance to be changed independently of the damper stroke, while 32 levels of damping adjustment provide control over ride firmness and handling response. The kit uses 8K front and 12K rear SAE9254 cold-wound springs and is fully rebuildable through Riaction Performance Shocks.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eRWD only. Excludes AWD\/xDrive and M3\/M4 applications. Front top-mount configuration must also be confirmed before ordering, as Riaction lists both 3-bolt and 5-bolt top-hat versions of the underlying BM-001-LT kit depending on vehicle production date. Do not order based on model year alone where the mounting configuration is uncertain.\u003c\/strong\u003e Professional installation, final torque checks and a complete wheel alignment are recommended after installation. Riaction states its products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687238881559,"sku":"RI-BM-001-LT","price":1503.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/RI-BM-001-LT.jpg?v=1786757699"},{"product_id":"megan-racing-bmw-e90-euro-i-coilovers-mr-cdk-e90-eu","title":"Megan Racing Euro I Coilovers – BMW E90 3 Series Sedan RWD 2006–2011 – MR-CDK-E90-EU","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E90-EU Euro I Coilover Kit is designed for BMW E90 Sedan owners wanting adjustable ride height and improved suspension response while retaining a more comfortable, street-oriented setup. Rubber-insulated front top mounts and the OE-style rear mounting arrangement help isolate road noise and vibration compared with more aggressive pillow-ball mounting systems.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers separate the damper oil from the high-pressure nitrogen chamber for consistent damping response, while full-length ride-height adjustment allows vehicle height to be changed without unnecessarily reducing available damper stroke. 32-way simultaneous compression and rebound adjustment provides additional control over ride firmness and chassis response.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eE90 Sedan and RWD only. Does not fit XI\/xDrive AWD models or E90 M3.\u003c\/strong\u003e Megan Racing sells separate coilover kits for E90 AWD and E9x M3 applications. Megan Racing application years are primarily US-market references, so Australian-delivered model years may vary. Professional installation, final hardware torque checks and a complete wheel alignment are strongly recommended. Megan Racing states its suspension products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and components may not be fully torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687239242007,"sku":"MR-CDK-E90-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e90-eu-1.jpg?v=1786757718"},{"product_id":"megan-racing-bmw-e90-e92-e93-m3-edc-coilovers-mr-cdk-e92m3-eu","title":"Megan Racing Euro I Coilovers – BMW E90\/E92\/E93 M3 with EDC – MR-CDK-E92M3-EU","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E92M3-EU Euro I Coilover Kit is designed specifically for E90, E92 and E93 BMW M3 models equipped with factory EDC. The Euro I range prioritises a balance of ride comfort, adjustable ride height and improved suspension control, making it suitable for drivers wanting a more performance-focused setup without moving to an excessively stiff track-oriented coilover.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe kit uses monotube dampers with full-length ride-height adjustment, allowing vehicle height to be changed independently of damper stroke. 32-way simultaneous compression and rebound adjustment provides control over ride firmness and chassis response, while the 7K front and 14K rear spring rates are matched specifically to the E9x M3 platform. Rubber-insulated front mounts help reduce additional road noise and vibration compared with solid pillow-ball mounting arrangements.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eFactory EDC-equipped M3 models only. Megan Racing explicitly states that this kit does NOT fit non-EDC vehicles.\u003c\/strong\u003e The EDC specification refers to vehicle compatibility; owners should confirm any EDC warning\/cancellation requirements with their installer before installation. Megan Racing application years are primarily US-market references, so Australian model years can vary. Professional installation, final hardware torque checks and a complete wheel alignment are strongly recommended. Megan Racing suspension products are designated \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and components may not be completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687239504151,"sku":"MR-CDK-E92M3-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e92m3-eu-1.jpg?v=1786757740"},{"product_id":"megan-racing-bmw-e92-euro-i-coilovers-mr-cdk-e92-eu","title":"Megan Racing Euro I Coilovers – BMW E92 3 Series Coupe RWD 2006–2012 – MR-CDK-E92-EU","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E92-EU Euro I Coilover Kit is designed for BMW E92 Coupe owners wanting adjustable ride height and improved handling while retaining a more comfortable, street-oriented suspension setup. Rubber-insulated front top mounts and the OE-style rear mounting arrangement help isolate road noise and vibration compared with more aggressive pillow-ball mounting systems.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers separate the damper oil from the high-pressure nitrogen chamber for consistent damping response, while full-length ride-height adjustment allows vehicle height to be changed without unnecessarily reducing available damper stroke. Adjustable damping provides additional control over ride firmness and chassis response.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eE92 Coupe and RWD only. Does not fit XI\/xDrive AWD models or E92 M3.\u003c\/strong\u003e Megan Racing lists a separate \u003ccode\u003eMR-CDK-E92M3-EU\u003c\/code\u003e kit for the E92 M3. Megan Racing application years are primarily US-market references, so Australian model years may vary slightly. Professional installation, final torque checks and a complete wheel alignment are strongly recommended. Megan Racing suspension components are designated \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and may not be fully torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687239569687,"sku":"MR-CDK-E92-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e92-eu-1.jpg?v=1786757756"},{"product_id":"megan-racing-bmw-e36-318ti-coilovers-mr-cdk-e36ti","title":"Megan Racing Euro II Coilovers – BMW E36 318ti Compact 1994–1998 – MR-CDK-E36TI","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E36TI Euro II Coilover Kit is specifically designed for the BMW E36 318ti Compact, using suspension components tailored to the Compact’s different rear suspension layout rather than the standard E36 3 Series setup. The kit provides adjustable ride height, damping and front camber for drivers looking to improve handling response while maintaining a relatively street-friendly spring setup.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers provide consistent damping performance, while separate spring perch and shock-length adjustment allows ride height to be changed while retaining useful suspension stroke. Camber-adjustable pillow-ball front top mounts provide additional front alignment adjustment, and the 6K front \/ 6K rear spring rates give this kit a more balanced setup specifically for the 318ti.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003e318ti Compact\/Hatchback only. Do not use this kit for standard E36 Coupe, Sedan, Convertible or Touring applications — Megan Racing lists separate E36 coilover kits for those vehicles.\u003c\/strong\u003e Megan Racing’s application years are primarily market-specific and can vary between countries, so Australian-delivered vehicles should be confirmed by chassis and suspension configuration rather than registration year alone. Professional installation, final torque checks and a wheel alignment are strongly recommended. Megan Racing states its suspension products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and components may not be completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687272861975,"sku":"MR-CDK-E36TI","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e36ti-1.jpg?v=1786759067"},{"product_id":"megan-racing-bmw-e36-euro-i-coilovers-mr-cdk-e36-eu","title":"Megan Racing Euro I Coilovers – BMW E36 3 Series \/ M3 1992–1998 – MR-CDK-E36-EU","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E36-EU Euro I Coilover Kit is designed for BMW E36 owners wanting adjustable ride height and improved suspension response while retaining a more street-friendly ride than Megan Racing’s more aggressive coilover ranges. Rubber-isolated front top mounts and the factory-style rear mounting arrangement help reduce noise and vibration entering the cabin.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe monotube dampers use separate oil and high-pressure nitrogen chambers for consistent damping response, while full-length ride-height adjustment allows the vehicle height to be changed without unnecessarily reducing available damper stroke. Adjustable damping provides additional control over ride firmness and handling response.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eFits standard E36 3 Series and E36 M3 applications. Excludes 318ti Compact\/Hatchback — Megan Racing lists MR-CDK-E36TI as the dedicated 318ti kit.\u003c\/strong\u003e Megan Racing application years are primarily US-market references, so Australian-delivered model years may vary. Professional installation, final hardware torque checks and a wheel alignment are strongly recommended. Megan Racing states its suspension products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and notes components may not be fully torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687303205143,"sku":"MR-CDK-E36-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e36-eu_1.jpg?v=1786759351"},{"product_id":"megan-racing-bmw-f30-f32-euro-i-coilovers-mr-cdk-bf30-eu","title":"Megan Racing Euro I Coilovers – BMW F30 3 Series \/ F32 4 Series RWD – MR-CDK-BF30-EU","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-BF30-EU Euro I Coilover Kit is designed for drivers who want a lower stance and improved handling while retaining a more comfortable, street-oriented ride. Megan Racing uses rubber-insulated front top mounts together with the factory-style rear mounting arrangement to help reduce road noise and vibration compared with more aggressive pillow-ball setups.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe monotube dampers use separate oil and high-pressure nitrogen chambers to improve damping consistency and response. Full-length ride-height adjustment allows the vehicle to be lowered without sacrificing shock stroke, while adjustable damping lets the suspension be fine-tuned for comfort, spirited road driving or more performance-focused use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eRWD models only. Requires the 3-stud front top-hat configuration. Excludes M3 and vehicles equipped with M Suspension \/ EDC.\u003c\/strong\u003e Confirm front strut\/top-mount configuration before ordering. Megan Racing suspension products are designated \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e, and Megan states components may not be completely torqued when supplied. Fuji Euro Parts recommends professional installation, final torque checks and a complete wheel alignment after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687306580247,"sku":"MR-CDK-BF30-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bf30-eu.jpg?v=1786759374"},{"product_id":"megan-racing-bmw-f30-f32-front-lower-control-arms-mrc-bm-0324-oe","title":"Megan Racing Front Lower Control Arms – BMW F30\/F32 RWD – MRC-BM-0324-OE","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRC-BM-0324-OE Front Lower Control Arms are designed as complete replacements for the factory front lower arms on compatible BMW F30 and F32 models. Their lightweight cast-aluminium construction reduces unnecessary weight while retaining the strength required for performance-oriented street and competition use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpherical and polyurethane bushings replace the softer factory rubber-bushed arrangement, reducing unwanted suspension play and allowing freer arm movement without binding. This can improve steering response, cornering consistency and overall front-end feedback while allowing the suspension to react more accurately to road inputs. All supplied hardware is corrosion-treated for added durability.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eRWD models only. Excludes xDrive\/AWD, M3 and M4.\u003c\/strong\u003e These are performance suspension components with firmer spherical\/polyurethane bushings, so increased road feedback and NVH compared with factory rubber bushings should be expected. Megan Racing states its suspension products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and that components are not necessarily fully torqued when supplied. Fuji Euro Parts recommends professional installation, confirming drivetrain\/chassis compatibility before purchase, checking all supplied hardware and completing a wheel alignment after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687310414103,"sku":"MRC-BM-0324-OE-i","price":644.84,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mrc-bm-0324-oe_1.jpg?v=1786759408"},{"product_id":"megan-racing-bmw-e82-e90-front-control-arms-mrs-bm-0231","title":"Megan Racing Front Lower Front-Side Control Arms – BMW E87\/E82\/E90\/E92\/E93 – MRS-BM-0231","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRS-BM-0231 Front Lower Control Arms replace the factory front-side lower suspension arms with reinforced performance-oriented components. Firmer bushings help reduce unwanted suspension compliance, providing more direct steering response and improved suspension control while retaining some isolation compared with solid or spherical joints.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstructed from high-strength steel alloy with reinforced rubber bushings, the arms are designed as direct replacements for the factory components. Megan Racing Japan specifically identifies MRS-BM-0231 as the front-side arm of the front lower suspension assembly and confirms that it is non-adjustable.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eRWD applications only. Excludes XI\/xDrive AWD, BMW 1M and E9x M3. These arms are non-adjustable and install in the front lower, front-side position.\u003c\/strong\u003e Megan Racing designates the product \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and states suspension components may not be completely torqued when supplied. Fuji Euro Parts recommends professional installation, confirming chassis\/drivetrain compatibility, checking all hardware torque and completing a wheel alignment after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687313821975,"sku":"MRS-BM-0231","price":423.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mrs-bm-0231-1.jpg?v=1786759437"},{"product_id":"megan-racing-bmw-e82-e90-rear-camber-arms-mrs-bm-0210","title":"Megan Racing Adjustable Rear Camber Arms – BMW E82\/E88\/E90\/E92 – MRS-BM-0210","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRS-BM-0210 Rear Camber Arms are designed to provide additional rear camber adjustment beyond the factory range, particularly useful on lowered vehicles where factory alignment adjustment may no longer be sufficient. Correcting rear camber can help improve tyre contact, handling consistency, straight-line stability and reduce uneven tyre wear.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe arms use a reinforced high-strength design with upgraded rubber bushings and an adjustable-length layout. Megan Racing Japan states its reinforced rubber bushings are significantly firmer than standard rubber, helping reduce unwanted suspension movement while retaining more isolation than a solid or pillow-ball joint.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eDoes not fit BMW 1M or E9x M3.\u003c\/strong\u003e A professional wheel alignment is required after installation. Megan Racing recommends installation by a knowledgeable technician or professional workshop and states its suspension products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e. Components are not necessarily fully torqued when supplied. Fuji Euro Parts recommends confirming chassis and model before ordering, professionally installing the arms, checking final hardware torque and completing a full wheel alignment before vehicle use.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687316738327,"sku":"MRS-BM-0210","price":374.59,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/img_0092.jpg?v=1786759457"},{"product_id":"megan-racing-bmw-f20-f22-f30-front-sway-bar-mrs-bm-0391","title":"Megan Racing 28mm Front Sway Bar – BMW F20\/F22\/F30\/F31\/F32\/F34 6-Cylinder RWD – MRS-BM-0391","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRS-BM-0391 Front Sway Bar is designed to reduce body roll and improve front-end response by increasing front roll stiffness during cornering. The upgraded bar helps the suspension work more consistently from side to side, improving steering response, chassis balance and overall stability during spirited driving.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeaturing a 28mm diameter and 2-way adjustable design, the MRS-BM-0391 allows the front roll stiffness to be fine-tuned to suit different suspension setups and driving preferences. It is specifically intended for compatible 6-cylinder, rear-wheel-drive BMW F-Series applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003e6-cylinder and RWD applications only. Does not fit xDrive\/AWD models.\u003c\/strong\u003e Do not use this part for 4-cylinder applications; Megan Racing lists \u003cstrong\u003eMRS-BM-0390\u003c\/strong\u003e separately for compatible 4-cylinder vehicles. Megan Racing designates its suspension products \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and states that components may not be fully torqued when supplied. Fuji Euro Parts recommends confirming chassis, engine and drivetrain before ordering and professionally installing and torque-checking all mounting hardware before use.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687322407191,"sku":"MRS-BM-0391","price":316.96,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mrs-bm-0391-1.jpg?v=1786759475"},{"product_id":"megan-racing-bmw-f20-f22-f30-front-sway-bar-mrs-bm-0390","title":"Megan Racing 28mm Front Sway Bar – BMW F20\/F22\/F30\/F31\/F32\/F34 4-Cylinder RWD – MRS-BM-0390","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRS-BM-0390 Front Sway Bar is designed to reduce body roll and improve front-end response by increasing roll stiffness during cornering. By better controlling the transfer of suspension forces between the left and right sides of the vehicle, the upgraded bar can provide sharper steering response, improved chassis balance and a more controlled feel through corners.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeaturing a 28mm diameter, the MRS-BM-0390 is specifically designed for compatible 4-cylinder, rear-wheel-drive BMW F-Series applications. It provides a performance-oriented upgrade for drivers looking to improve chassis response while retaining the factory-style sway bar layout.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003e4-cylinder and RWD applications only. Does not fit xDrive\/AWD models. Do not use this part for 6-cylinder applications — Megan Racing lists MRS-BM-0391 separately for compatible 6-cylinder RWD vehicles.\u003c\/strong\u003e Professional installation is recommended. Megan Racing classifies its suspension products as \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and states that components may not be completely torqued when supplied. Fuji Euro Parts recommends confirming engine, chassis and drivetrain before ordering and checking all mounting hardware and clearances after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687325815063,"sku":"MRS-BM-0390","price":316.96,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mrs-bm-0390-1.jpg?v=1786759495"},{"product_id":"megan-racing-bmw-e82-e90-rear-toe-arms-mrs-bm-0270","title":"Megan Racing Adjustable Rear Toe Control Arms – BMW E82\/E88\/E90\/E91\/E92 – MRS-BM-0270","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRS-BM-0270 Rear Toe Control Arms are designed to provide additional rear toe adjustment beyond the factory range. Correct rear toe is important for straight-line stability, cornering behaviour and tyre wear, particularly on lowered vehicles where factory adjustment may no longer be sufficient.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eConstructed from high-strength steel alloy with spherical pillow-ball joints, these adjustable arms reduce the compliance associated with factory rubber-bushed links while allowing precise rear toe correction. The powder-coated finish provides additional corrosion protection for street and performance-oriented suspension setups.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eDoes not fit BMW 1M or E9x M3 models.\u003c\/strong\u003e A professional wheel alignment is required after installation. Megan Racing specifies its suspension products as \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and notes that components may not be completely torqued when supplied. Fuji Euro Parts recommends professional installation, verification of chassis compatibility, final hardware torque checks and a complete wheel alignment before vehicle use.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687328207127,"sku":"MRS-BM-0270","price":313.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mrs-bm-0270-1.jpg?v=1786759517"},{"product_id":"megan-racing-bmw-e82-e90-rear-trailing-arms-mrs-bm-0220","title":"Megan Racing Adjustable Rear Trailing Arms – BMW E82\/E88\/E90\/E92 – MRS-BM-0220","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRS-BM-0220 Rear Trailing Arms are designed to replace the softer factory rear suspension links with stronger, performance-oriented components. Their pillow-ball ends reduce the compliance of factory rubber bushings, providing a more direct connection between the suspension and chassis for improved response and more consistent handling under hard cornering.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eConstructed from high-strength steel alloy with Megan Racing’s 3-stage powder-coated finish, the arms feature an adjustable-length design and self-lubricating pillow-ball ends. The adjustable geometry can be used to fine-tune the rear suspension setup on compatible BMW 1 Series and 3 Series applications.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eBMW 1M is not compatible. There is conflicting third-party information regarding E9x M3 fitment, so Fuji Euro Parts recommends M3 owners confirm compatibility before ordering.\u003c\/strong\u003e A professional wheel alignment is required after installation. Megan Racing specifies its suspension components as \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and notes that parts may not be completely torqued when supplied. Professional installation and final torque\/alignment checks are strongly recommended.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687331877143,"sku":"MRS-BM-0220","price":313.2,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/img_0090.jpg?v=1786759536"},{"product_id":"megan-racing-bmw-e82-e90-front-lower-control-arms-mrs-bm-0230","title":"Megan Racing Front Lower Rear-Side Control Arms – BMW E82\/E87\/E90\/E92\/E93 – MRS-BM-0230","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRS-BM-0230 Front Lower Control Arms are designed to replace the factory front suspension arms with firmer, performance-oriented components. Hardened rubber bushings reduce the compliance found in softer OEM bushings, helping improve steering response, braking stability and suspension control while retaining some vibration isolation for street and performance use.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMegan Racing Japan identifies MRS-BM-0230 specifically as the rear-side arm within the front lower suspension assembly. The arms are non-adjustable and are intended as direct replacement components rather than alignment-adjustment arms.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eExcludes XI\/xDrive AWD, 1M and M3 models. These arms are non-adjustable and install in the front lower rear-side position.\u003c\/strong\u003e A professional wheel alignment is recommended after installation. Megan Racing designates its suspension products \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and states components may not be fully torqued when supplied. Fuji Euro Parts recommends professional installation, verification of chassis\/drivetrain compatibility and a complete hardware\/torque check before vehicle use.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687333515543,"sku":"MRS-BM-0230","price":308.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mrs-bm-0230-1.jpg?v=1786759552"},{"product_id":"megan-racing-bmw-e90-lowering-springs-mr-ls-e90","title":"Megan Racing Euro Lowering Springs – BMW E90 3 Series Sedan 2006–2011 – MR-LS-E90","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-LS-E90 Euro Lowering Springs are designed to lower compatible BMW E90 3 Series Sedans while improving handling response and retaining smooth, street-oriented ride characteristics. Lowering the vehicle reduces its centre of gravity, helping reduce body roll and providing a more planted stance and responsive feel through corners.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eManufactured from SAE 9254 cold-wound steel with a durable powder-coated finish, the springs are engineered to resist premature sagging and directly replace the factory springs. Megan Racing specifies an approximately 25.4 mm \/ 1-inch front drop and 17.78 mm \/ 0.7-inch rear drop.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eE90 Sedan, RWD only. Excludes AWD\/xDrive and M3 models.\u003c\/strong\u003e Lowering can affect suspension geometry, wheel alignment, tyre clearance and available suspension travel. Professional installation and a wheel alignment after installation are recommended. Megan Racing designates its suspension products \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e. Fuji Euro Parts recommends confirming chassis and drivetrain before ordering and checking wheel\/tyre and suspension clearance after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687342002455,"sku":"MR-LS-E90","price":286.89,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-ls-e90-1.jpg?v=1786759605"},{"product_id":"megan-racing-bmw-e90-e92-xdrive-lowering-springs-mr-ls-be90x","title":"Megan Racing Euro Lowering Springs – BMW E90\/E92 xDrive AWD 2008–2013 – MR-LS-BE90X","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-LS-BE90X Euro Lowering Springs are designed specifically for compatible BMW E90\/E92 xDrive AWD models, providing a lower ride height while improving handling response and maintaining street-oriented ride characteristics. Lowering the vehicle reduces its centre of gravity, helping reduce body roll and giving the chassis a more planted stance and feel.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eManufactured from SAE 9254 cold-wound steel with a durable powder-coated finish, the springs are designed to resist premature sagging and directly replace the factory springs. Megan Racing specifies approximately 28 mm of front lowering and 21 mm of rear lowering for this application.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eAWD\/xDrive applications only. Not for RWD or M3 models.\u003c\/strong\u003e Confirm chassis and drivetrain before ordering. Lowering can affect suspension geometry, wheel alignment, tyre clearance and suspension travel. Professional installation and a wheel alignment after installation are recommended. Megan Racing designates its suspension products \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and states suspension components may not be completely torqued when supplied. Fuji Euro Parts recommends confirming Australian-market vehicle specifications before installation and checking all clearances after fitment.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687347736855,"sku":"MR-LS-BE90X","price":261.84,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/dsc4270-edit.jpg?v=1786759630"},{"product_id":"megan-racing-bmw-e92-lowering-springs-mr-ls-e92","title":"Megan Racing Euro Lowering Springs – BMW E92 3 Series Coupe 2006–2013 – MR-LS-E92","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-LS-E92 Euro Lowering Springs are designed to lower the BMW E92 Coupe while improving handling response and maintaining smooth, street-oriented ride characteristics. The reduced ride height lowers the vehicle’s centre of gravity, helping reduce body roll and giving the car a more planted stance and more responsive feel through corners.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eManufactured from SAE 9254 cold-wound steel with a durable powder-coated finish, the springs are designed to resist premature sagging and directly replace the factory springs. Megan Racing specifies an approximate 38.1 mm \/ 1.5-inch front drop and 25.4 mm \/ 1-inch rear drop.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eCoupe only. Excludes AWD \/ xDrive models.\u003c\/strong\u003e Lowering can affect wheel alignment, suspension geometry, tyre clearance and available suspension travel. Professional installation and a wheel alignment after installation are recommended. Megan Racing designates this product \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e. Fuji Euro Parts recommends confirming chassis, body style and drivetrain before ordering and checking wheel\/tyre clearance after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687351243031,"sku":"MR-LS-E92","price":261.84,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-ls-e92-1.jpg?v=1786759652"},{"product_id":"megan-racing-bmw-f30-lowering-springs-mr-ls-bf30","title":"Megan Racing Euro Lowering Springs – BMW F30 328i\/335i 2012–2018 – MR-LS-BF30","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-LS-BF30 Euro Lowering Springs are designed to lower the BMW F30 while improving handling response and maintaining comfortable street-oriented ride characteristics. The reduced ride height lowers the vehicle’s centre of gravity, helping reduce body roll, improve stability and provide a more purposeful stance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eManufactured from SAE 9254 cold-wound steel with a durable powder-coated finish, the springs are designed to resist premature sagging and directly replace the factory springs. Megan Racing specifies approximately 33 mm of front lowering and 29 mm of rear lowering.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eFor the lowest fitment risk, Fuji Euro Parts recommends this spring set for RWD BMW F30 328i\/335i only. Excludes M3 and AWD\/xDrive models.\u003c\/strong\u003e Lowering can affect suspension geometry, tyre clearance and available suspension travel. Professional installation and a wheel alignment after installation are recommended. Megan Racing designates its suspension products \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687389319447,"sku":"MR-LS-BF30","price":286.89,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-ls-bf30-1.jpg?v=1786759934"},{"product_id":"megan-racing-bmw-f22-f30-rear-camber-arms-mrs-bm-0311","title":"Megan Racing Rear Upper Rear Camber Arms – BMW F22\/F30\/F31\/F34 – MRS-BM-0311","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRS-BM-0311 Rear Upper Rear Camber Arms are designed to provide additional rear camber adjustment beyond the factory range. This is especially useful on lowered vehicles where suspension geometry can create excessive negative camber, allowing alignment to be corrected for improved tyre contact, more consistent handling and reduced uneven tyre wear.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe arms replace the factory rear upper rear-side suspension links and use a reinforced steel-alloy construction designed for performance use. The adjustable design allows rear camber to be fine-tuned, and Megan Racing recommends pairing them with MRS-BM-0320 rear upper forward arms where greater overall rear camber adjustment is required.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: These arms install in the \u003cstrong\u003erear upper, rear-side position\u003c\/strong\u003e. A professional wheel alignment is required after installation. Megan Racing recommends installation by a knowledgeable technician or professional workshop and states its suspension products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e. Components may not be fully torqued when supplied. Fuji Euro Parts recommends confirming chassis compatibility before ordering, professionally installing the arms and completing a full wheel alignment and hardware torque check before vehicle use.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687421006103,"sku":"MRS-BM-0311","price":254.32,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mrs-bm-0311-1_1.jpg?v=1786760196"},{"product_id":"megan-racing-bmw-e36-lowering-springs-mr-ls-be36","title":"Megan Racing Euro Version Lowering Springs – BMW E36 3 Series 1992–1998 – MR-LS-BE36","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-LS-BE36 Euro Version Lowering Springs are designed to lower the BMW E36 while improving handling response and maintaining a smooth, street-friendly ride. The reduced ride height lowers the vehicle’s centre of gravity, helping reduce body roll and giving the car a more planted stance and feel.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eManufactured from SAE 9254 cold-wound steel and finished with a phosphate powder coating, the springs are designed for durability and resistance to premature sagging. They are a direct replacement for the factory springs and provide an approximately 50.8 mm \/ 2-inch drop at both the front and rear.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: Megan Racing lists this product for BMW E36 3 Series applications and specifically notes \u003cstrong\u003eM3 is not compatible\u003c\/strong\u003e. Lowering a vehicle can affect suspension geometry, wheel alignment, tyre clearance and available suspension travel. A professional wheel alignment is recommended after installation. Megan Racing designates its suspension products \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e. Fuji Euro Parts recommends professional installation and confirming chassis, suspension configuration, tyre\/wheel clearance and local road-use requirements before installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687424610583,"sku":"MR-LS-BE36","price":236.78,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-ls-be36-1.jpg?v=1786760220"},{"product_id":"megan-racing-bmw-f20-f22-f30-rear-sway-bar-mrs-bm-0392","title":"Megan Racing 19mm Rear Sway Bar – BMW F20\/F22\/F30\/F31\/F32\/F34 – MRS-BM-0392","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRS-BM-0392 Rear Sway Bar is designed to reduce body roll and improve chassis balance by increasing rear roll stiffness. By transferring suspension forces more effectively between the left and right sides of the vehicle, the upgraded rear bar can provide sharper response, improved stability and a more controlled feel during cornering.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeaturing a 19mm performance-oriented design, the MRS-BM-0392 is intended as a rear suspension upgrade for compatible BMW F-Series 1, 2, 3 and 4 Series models. The system uses a multi-piece design to suit the vehicle's rear suspension layout.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eFor RWD applications only. Do not order for AWD\/xDrive models unless compatibility is confirmed before purchase.\u003c\/strong\u003e Professional installation is recommended. Megan Racing suspension components are designated \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e, and Megan states components may not be completely torqued when supplied. Fuji Euro Parts recommends confirming chassis and drivetrain before ordering and ensuring all mounting hardware is correctly installed and torqued before vehicle use.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687426052375,"sku":"MRS-BM-0392","price":235.53,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mrs-bm-0392-1.jpg?v=1786760235"},{"product_id":"megan-racing-bmw-e36-e46-z4-rear-camber-arms-mrc-bm-0310-02","title":"Megan Racing Adjustable Rear Camber Arms – BMW E36\/E46\/Z4 E85\/E86\/E89 – MRC-BM-0310-02","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRC-BM-0310-02 Rear Camber Arms provide additional rear camber adjustment beyond the factory range, making them especially useful on lowered vehicles where suspension geometry can cause excessive negative camber and uneven tyre wear. The adjustable design allows rear alignment to be fine-tuned for improved tyre contact, handling stability and suspension setup.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe arms use a reinforced steel construction with an on-car turnbuckle-style adjustment, allowing camber changes to be made without removing the arm from the vehicle. They are designed as a direct replacement for the factory rear camber links on compatible BMW E36, E46 and Z4 applications.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: A \u003cstrong\u003eprofessional wheel alignment is required after installation\u003c\/strong\u003e. Megan Racing specifies its suspension products for \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and states components may not be completely torqued when supplied. Correct installation, adjustment and final torque are the installer’s responsibility. Fuji Euro Parts recommends professional installation, verification of vehicle compatibility before fitting and a complete wheel alignment after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Rear Camber Kit for BMW 3-Series E36 92-98-BMW E46 99-05-BMW Z4 E85 03-08 - MRC-BM-0310-02","offer_id":54687428051223,"sku":"MRC-BM-0310-02-I","price":220.08,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mrs-bm-0310-1_1_2.jpg?v=1786760255"},{"product_id":"megan-racing-rear-toe-arms-mrc-bm-0170","title":"Megan Racing Rear Toe Control Arms – BMW G20\/G21\/G22\/G29 \u0026 Toyota GR Supra – MRC-BM-0170","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRC-BM-0170 Rear Toe Control Arms are designed to provide additional rear toe adjustment beyond the factory range. This is particularly useful on lowered vehicles where suspension geometry can move outside the desired alignment range, allowing rear toe to be corrected for improved straight-line stability, handling consistency and more even tyre wear.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eConstructed from lightweight steel alloy and finished using Megan Racing’s 3-stage powder-coating process, the arms are designed for strength, durability and corrosion resistance. Polyurethane bushings reduce the unwanted movement found in softer factory rubber bushings while allowing the suspension to articulate correctly, helping provide a more direct and predictable rear suspension response.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: These arms install in the \u003cstrong\u003erear lower, rear-side position\u003c\/strong\u003e and provide \u003cstrong\u003etoe adjustment\u003c\/strong\u003e. Megan Racing specifies this product as \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e. A professional wheel alignment is required after installation. Confirm chassis and model before ordering, as Megan Racing applications may use US\/Japanese-market model years that differ from Australian-delivered vehicles. Correct installation, adjustment and final hardware torque are the installer’s responsibility. Fuji Euro Parts recommends professional installation, verification of suspension clearance and a complete wheel alignment after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687431983383,"sku":"MRC-BM-0170","price":212.98,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mrc-bm-0170.jpg?v=1786760286"},{"product_id":"megan-racing-bmw-f22-f30-rear-camber-arms-mrs-bm-0320","title":"Megan Racing Rear Upper Forward Camber Arms – BMW F22\/F30\/F31\/F34 – MRS-BM-0320","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRS-BM-0320 Rear Upper Forward Camber Arms are designed to provide additional rear camber adjustment beyond the factory range. This is especially useful on lowered vehicles where suspension geometry can move outside the desired alignment range, allowing camber to be corrected for improved tyre contact, handling consistency and tyre wear.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eConstructed from high-strength steel alloy, the arms are designed to withstand the increased loads associated with performance driving while remaining relatively lightweight. A durable powder-coated finish provides corrosion protection, while reinforced bushings help provide a more direct suspension response. The arms replace the factory rear upper forward suspension links and can be paired with Megan Racing MRS-BM-0311 rear upper rear-side arms for greater rear camber adjustment capability.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: These arms install in the \u003cstrong\u003erear upper, forward-side position\u003c\/strong\u003e. A professional wheel alignment is required after installation. Megan Racing specifies its suspension products as \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and notes that components may not be completely torqued out of the box. Correct installation, adjustment and final hardware torque are the installer’s responsibility. Fuji Euro Parts recommends professional installation, verifying chassis compatibility before ordering and completing a full wheel alignment after fitment.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687434440983,"sku":"MRS-BM-0320","price":223.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mrs-bm-0320-1.jpg?v=1786760301"},{"product_id":"megan-racing-g20-g22-supra-rear-trailing-arms-mrc-bm-0181","title":"Megan Racing Rear Trailing Arms (Front Lower) – BMW G20\/G21\/G22\/G29 \u0026 Toyota GR Supra – MRC-BM-0181","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRC-BM-0181 Rear Trailing Arms replace the front-lower links in the rear suspension, helping reduce unwanted suspension movement and compliance compared with the factory rubber-bushed components. Firmer polyurethane bushings allow the suspension to respond more consistently, improving chassis response and suspension control during cornering and acceleration.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe arms are constructed from lightweight steel alloy and protected with Megan Racing’s 3-stage powder-coating process for durability and corrosion resistance. Polyurethane bushings and corrosion-treated hardware are incorporated into a direct bolt-on design suitable for compatible street, show and performance-oriented vehicles.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: These are \u003cstrong\u003erear suspension trailing arms located at the front-lower position\u003c\/strong\u003e. Megan Racing designates the product \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e. Confirm chassis, model and application before ordering. Megan Racing applications may use US\/Japanese-market model years, which can differ from Australian-delivered vehicles. Correct installation and final hardware torque are the installer’s responsibility. Fuji Euro Parts recommends professional installation and verification of suspension clearance and fitment before vehicle use.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687532482839,"sku":"MRC-BM-0181","price":191.68,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mrc-bm-0181_1.jpg?v=1786762352"},{"product_id":"megan-racing-bmw-supra-rear-camber-arms-mrc-bm-0121","title":"Megan Racing Rear Upper Camber Arms – BMW G20\/G21\/G22\/G29 \u0026 Toyota GR Supra A90\/A91 – MRC-BM-0121","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MRC-BM-0121 Rear Upper Camber Arms are designed to provide additional rear camber adjustment beyond the factory range. This is particularly useful on lowered vehicles where suspension geometry can move outside OEM alignment specifications, allowing camber to be corrected for improved tyre contact, alignment and handling performance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eConstructed from tubular steel with polyurethane bushings, the arms provide a more performance-oriented replacement for the factory components. Reverse-threaded turnbuckles allow easier adjustment while installed, making them suitable for street, show and performance-oriented suspension setups where additional rear alignment adjustment is required.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eThese arms are for rear upper camber adjustment and are intended for off-road use only according to Megan Racing. A professional wheel alignment is required after installation.\u003c\/strong\u003e Confirm chassis, model and application before ordering. Megan Racing applications are primarily based on US-market vehicles and Australian-market model years\/specifications may vary. Correct installation, adjustment and final hardware torque are the installer’s responsibility. Fuji Euro Parts recommends professional installation and alignment and verification of vehicle compatibility before installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687532777751,"sku":"MRC-BM-0121","price":184.58,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mrc-bm-0121.jpg?v=1786762421"},{"product_id":"megan-racing-bmw-f30-f31-front-strut-bar-mr-sb-bf30fu-1p","title":"Megan Racing Race-Spec Front Strut Tower Bar – BMW F30\/F31 3 Series 2012–2018 – MR-SB-BF30FU-1P","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing Race-Spec Front Strut Tower Bar is designed to increase front-end chassis rigidity by connecting the left and right strut towers at a major structural point. Reducing chassis flex helps the suspension operate more consistently and can improve steering response, stability and overall handling feel during cornering.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eConstructed from strong aluminium to tight tolerances and finished in polished aluminium, the one-piece brace provides additional chassis support without unnecessary weight. It is suitable for compatible BMW F30 Sedan and F31 Touring street, show and performance-oriented builds, including compatible diesel models.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eCompatible vehicles must use the 5-bolt front strut mounting configuration. Does not fit M3. Installation requires trimming or removal of the ECU cover.\u003c\/strong\u003e Confirm chassis and strut mounting configuration before ordering. Megan Racing applications are based primarily on US-market vehicles, so Australian-market specifications may vary. Megan Racing states its suspension products are for off-road use only and that components may not be completely torqued out of the box. Fuji Euro Parts recommends professional installation, confirming clearance before installation and checking all mounting hardware is correctly torqued before vehicle use.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687532810519,"sku":"MR-SB-BF30FU-1P","price":161.61,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-sb-bf30fu-1p.jpg?v=1786762441"},{"product_id":"megan-racing-bmw-e30-front-strut-bar-mr-sb-e30fu-1p","title":"Megan Racing Race-Spec Front Strut Tower Bar – BMW E30 3 Series \/ M3 – MR-SB-E30FU-1P","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing Race-Spec Front Strut Tower Bar is designed to increase front-end chassis rigidity by connecting the left and right strut towers at a major structural point. Reducing chassis flex allows the suspension to operate more consistently and can improve steering response, stability and overall handling feel during cornering.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe Race-Spec brace features a lightweight one-piece aluminium construction manufactured to tight tolerances and finished in polished aluminium. It provides additional chassis support without unnecessary weight while maintaining a clean appearance in the engine bay, making it suitable for compatible E30 street, show and performance-oriented builds.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eFor RWD applications only — Megan Racing specifically excludes AWD models. Due to conflicting fitment information regarding E30 Convertibles, Fuji Euro Parts recommends this product for Coupe and Sedan applications only unless compatibility is confirmed before purchase.\u003c\/strong\u003e Confirm chassis and application before ordering. Megan Racing applications are based on US-market vehicles, so Australian-market specifications and model years may vary. Megan Racing states its suspension products are for off-road use only and components may not be completely torqued out of the box. Correct installation and final torque verification are the installer’s responsibility. Fuji Euro Parts recommends professional installation and verification of all clearances and mounting hardware before use.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687532876055,"sku":"MR-SB-E30FU-1P","price":161.61,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-sb-e30fu-1p-1.jpg?v=1786762459"},{"product_id":"megan-racing-bmw-e82-e90-front-strut-bar-mr-sb-e90fu-1p","title":"Megan Racing Race-Spec Front Strut Tower Bar – BMW E82\/E88\/E90\/E91\/E92\/E93 – MR-SB-E90FU-1P","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing Race-Spec Front Strut Tower Bar is designed to increase front-end chassis rigidity by tying the suspension towers together at a key structural point. Reducing flex between the towers helps the suspension work more consistently and can improve steering response, stability and overall chassis feel during cornering.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe one-piece bar is constructed from strong aluminium and finished in polished aluminium, providing additional chassis support without excessive weight. It is suitable for compatible BMW 1 Series and 3 Series street, show and performance-oriented builds.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: Does not fit M models, diesel models or N55-engine vehicles. Confirm chassis, engine and application before ordering. Megan Racing applications are based on US-market vehicles, so Australian-market model years\/specifications may vary. Megan Racing states suspension products are for off-road use only and components may not be completely torqued out of the box. Correct installation and final torque verification are the installer’s responsibility. Fuji Euro Parts recommends professional installation and confirming all clearances before use.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687542771991,"sku":"MR-SB-E90FU-1P","price":161.61,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-sb-e90fu-1p-1.jpg?v=1786763082"},{"product_id":"megan-racing-bmw-e46-front-strut-bar-mr-sb-e46fu-1p","title":"Megan Racing Race-Spec Front Strut Tower Bar – BMW E46 3 Series \/ M3 – MR-SB-E46FU-1P","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing Race-Spec Front Strut Tower Bar is designed to increase chassis rigidity by connecting the front suspension towers at a major structural point. Reducing chassis flex helps the suspension operate more consistently and can improve steering response, stability and overall handling feel during cornering.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIts lightweight one-piece aluminium construction is manufactured to tight tolerances and finished in polished aluminium, providing additional chassis support without unnecessary weight while maintaining a clean appearance in the engine bay. It is suitable for compatible BMW E46 street, show and performance builds.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: A component\/box in the engine bay may need to be repositioned slightly during installation. Confirm chassis and application before ordering. Megan Racing applications are based on US-market vehicles, so Australian-market specifications\/model years may vary. Megan Racing states suspension products are intended for off-road use and correct installation\/final torque verification is the installer’s responsibility. Fuji Euro Parts recommends professional installation and verification of clearance and fitment before use.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687542804759,"sku":"MR-SB-E46FU-1P","price":161.61,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/MR-SB-E46FU-1P.jpg?v=1786763096"},{"product_id":"megan-racing-bmw-e36-rear-strut-bar-mr-sb-e36ru-1p","title":"Megan Racing Race-Spec Rear Strut Tower Bar – BMW E36 3 Series \/ M3 – MR-SB-E36RU-1P","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing Race-Spec Rear Strut Tower Bar is designed to increase chassis rigidity by tying the rear suspension mounting points together, helping reduce vertical and lateral chassis flex. By allowing the suspension to work more consistently, the brace can improve chassis response, stability and overall handling feel during cornering.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe three-piece design uses powder-coated high-strength steel mounting bases with a lightweight reinforced aluminium centre bar finished in polished aluminium. This provides a strong connection between the rear suspension towers while maintaining a clean appearance in the luggage area.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: Excludes E36 318ti \/ TI hatchback models and Convertibles. Rear interior\/trunk trim panels may require removal or modification for installation. Confirm chassis and body style before ordering. Megan Racing states its application years are based on US-market vehicles, so Australian-market model years\/specifications may vary. Correct installation and final setup are the installer’s responsibility. Fuji Euro Parts recommends professional installation and checking all hardware is correctly fitted and torqued before vehicle use.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687543066903,"sku":"MR-SB-E36RU-1P","price":161.61,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-sb-e36ru-1p-1.jpg?v=1786763113"},{"product_id":"megan-racing-bmw-e36-front-strut-bar-mr-sb-e36fu-1p","title":"Megan Racing Race-Spec Front Strut Tower Bar – BMW E36 3 Series \/ M3 – MR-SB-E36FU-1P","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing Race-Spec Front Strut Tower Bar is designed to increase chassis rigidity by tying the front suspension towers together at a major structural point. Reducing flex between the strut towers helps the suspension operate more consistently and can improve steering response, stability and overall chassis feel during cornering.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIts lightweight one-piece aluminium construction is manufactured to tight tolerances and finished in polished aluminium, providing additional chassis support without unnecessary weight while maintaining a clean appearance in the engine bay. It is a straightforward chassis upgrade for compatible six-cylinder BMW E36 street, show and performance builds.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Installation Notes:\u003c\/strong\u003e Fits inline-6 E36 applications only and does not fit 318ti models. Confirm chassis, engine and application before ordering. Megan Racing applications are based on US-market vehicles, so Australian-market specifications\/model years may vary. Megan Racing states its suspension products are intended for off-road use only and that components may not be completely torqued out of the box. Correct installation and final torque verification are the installer’s responsibility. Fuji Euro Parts recommends professional installation and verification of fitment before installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687543230743,"sku":"MR-SB-E36FU-1P","price":161.61,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-sb-e36fu-1p-1.jpg?v=1786763132"},{"product_id":"megan-racing-bmw-e30-rear-strut-bar-mr-sb-e30ru-1p","title":"Megan Racing Race-Spec Rear Strut Tower Bar – BMW E30 3 Series 1982–1991 – MR-SB-E30RU-1P","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing Race-Spec Rear Strut Tower Bar is designed to increase chassis rigidity by tying the rear suspension towers together at a key structural point. Reducing chassis flex helps the suspension operate more consistently and can provide a more responsive, connected feel during cornering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIts lightweight one-piece aluminium construction provides additional chassis support without unnecessary weight, while the polished finish gives the brace a clean appearance in the rear of the vehicle. Suitable as a chassis upgrade for street and performance-oriented BMW E30 builds.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Installation Notes:\u003c\/strong\u003e Not suitable for E30 Convertible models. Confirm vehicle chassis, body style and application before ordering. Professional installation is recommended. Megan Racing notes that its vehicle applications are based on US-market models, so Australian-market specifications and model years may vary. Megan Racing also states that correct installation and setup are the responsibility of the installer and that its suspension products are intended for off-road use. Fuji Euro Parts recommends verifying fitment before installation and following all manufacturer installation, safety and warranty requirements.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687543656727,"sku":"MR-SB-E30RU-1P","price":161.61,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-sb-e30ru-1p-1.jpg?v=1786763255"},{"product_id":"megan-racing-bmw-g20-g21-g22-euro-i-coilovers-mr-cdk-bg20-eu","title":"Megan Racing Euro I Coilovers – BMW 3 Series G20\/G21 2019+ \u0026 4 Series G22 2021+ – MR-CDK-BG20-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed to provide adjustable ride height and damping while retaining a more street-focused level of comfort. The full-length adjustable design allows ride height changes without relying solely on spring preload, while monotube dampers and 32-way simultaneous compression\/rebound adjustment allow the suspension response to be fine-tuned for street, spirited driving or track-oriented setups.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit retains the factory front and rear strut\/shock top mounts, helping isolate additional road noise compared with solid aftermarket upper mounts. Spring rates are 6 kgf\/mm front and 11 kgf\/mm rear.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e Megan Racing lists this same part number for both the BMW G20\/G21 3 Series and G22 4 Series. M models are excluded. Factory front and rear top mounts must be reused. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and states that suspension components must be correctly installed. Their application years are based primarily on US-market vehicles, so Australian-market model year and specification should be confirmed before purchase.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54819478274327,"sku":"MR-CDK-BG20-EU-ii","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bg20-eu_1.jpg?v=1787812134"}],"url":"https:\/\/fujieuroparts.com.au\/collections\/suspension-handling.oembed?page=2","provider":"Fuji Euro Parts","version":"1.0","type":"link"}