{"title":"Coilovers","description":null,"products":[{"product_id":"megan-racing-bmw-e46-spec-rs-coilovers-mr-cdk-e46-rs","title":"Megan Racing Spec-RS Coilovers – BMW E46 3 Series RWD 1999–2005 – MR-CDK-E46-RS","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E46-RS Spec-RS Coilover Kit is the track-focused suspension option for compatible BMW E46 3 Series models, providing a much greater level of suspension tuning than Megan Racing’s Euro-series kits. External reservoirs increase oil capacity and allow separate compression and rebound adjustment, helping maintain more consistent damping during sustained high-load and circuit driving.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe system features 32 levels of damper adjustment, full-length ride-height adjustment and pillow-ball front upper mounts with camber plates. Separate spring-perch and shock-length adjustment allows vehicle height to be tuned independently of spring preload, while the external-reservoir design provides additional control for performance suspension setup and corner balancing.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eRWD non-M E46 applications only. Excludes AWD\/xi and E46 M3. Megan Japan also specifically states that 318i Touring\/Wagon models are not compatible.\u003c\/strong\u003e Megan Racing notes that the Spec-RS system \u003cstrong\u003ecannot be adjusted back to factory ride height and is designed to lower the vehicle significantly\u003c\/strong\u003e, which should be considered for road clearance and wheel\/tyre fitment. Reservoir-equipped dampers require careful adjustment; Megan Japan warns that incorrect handling of the oil-line connection during ride-height adjustment can damage the damper. \u003cstrong\u003eProfessional installation and setup by an experienced suspension workshop is strongly recommended\u003c\/strong\u003e, followed by final torque checks, clearance checks and a complete wheel alignment. Megan Racing specifies its products as \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54682654671127,"sku":"MR-CDK-E46-RS","price":2003.23,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e46-rs-1.jpg?v=1786666598"},{"product_id":"megan-racing-bmw-e46-euro-ii-coilovers-mr-cdk-e46","title":"Megan Racing Euro II Coilovers – BMW E46 3 Series RWD 1999–2005 – MR-CDK-E46","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E46 Euro II Coilover Kit is designed for BMW E46 3 Series owners wanting a more performance-focused suspension setup with adjustable ride height, damping and front camber. Compared with the Euro I version, the Euro II system adds camber-adjustable front upper mounts for greater alignment control and suspension tuning.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers provide consistent damping response, while 32-way simultaneous compression and rebound adjustment allows ride firmness and handling characteristics to be fine-tuned. Full-length adjustment allows ride height changes while retaining usable damper stroke, with the rear spring height and shock length independently adjustable.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eCompatible with non-M, RWD E46 3 Series applications only. Does not fit E46 M3; Megan Racing offers the dedicated MR-CDK-E46M3 kit. AWD\/325xi\/330xi applications are not compatible with this SKU.\u003c\/strong\u003e Megan Racing application years are primarily US-market references, so Australian model years may differ. Professional installation, final torque checks and a complete wheel alignment are strongly recommended. Megan Racing states its suspension components are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and are not necessarily completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54682655785239,"sku":"MR-CDK-E46","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e46-1.jpg?v=1786666687"},{"product_id":"riaction-bmw-e46-rwd-coilovers-ri-bm-008-lt","title":"Riaction Performance Coilovers – BMW E46 3 Series RWD Non-M 1999–2005 – RI-BM-008-LT","description":"\u003cp\u003e\u003cstrong\u003eThe Riaction Performance RI-BM-008-LT Coilover Kit is designed for rear-wheel-drive, non-M BMW E46 3 Series models, providing adjustable ride height, increased suspension control and improved handling while retaining a street-oriented level of comfort. Riaction's monotube damper design combines durable carbon-steel shock bodies with precision-machined aluminium components for consistent performance and long-term serviceability.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFull-length ride-height adjustment allows the vehicle's stance to be changed while retaining usable damper travel, while 32 levels of damping adjustment provide control over ride firmness and handling response. The standard BM-008-LT kit uses matched 8K front and 8K rear SAE9254 cold-wound springs and is fully rebuildable through Riaction Performance Shocks.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eNon-M and RWD applications only. Does not fit E46 M3 or XI\/AWD models. Riaction manufactures the separate BM-028-LT specifically for E46 AWD models.\u003c\/strong\u003e Confirm chassis and drivetrain before ordering. Professional installation, final hardware torque checks and a complete wheel alignment are recommended after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54682662568215,"sku":"RI-BM-008-LT","price":1503.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/RI-BM-008-LT.jpg?v=1786667636"},{"product_id":"megan-racing-bmw-e46-euro-i-coilovers-mr-cdk-e46-eu","title":"Megan Racing Euro I Coilovers – BMW E46 3 Series RWD 1999–2005 – MR-CDK-E46-EU","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E46-EU Euro I Coilover Kit is designed for BMW E46 3 Series owners wanting adjustable ride height and improved suspension control while retaining a more comfortable, street-oriented ride. The Euro I setup uses softer spring rates and rubber-isolated front top mounts to reduce additional road noise and vibration compared with Megan Racing’s more aggressive Euro II and Spec-RS systems.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers separate the damper oil from the high-pressure nitrogen chamber for consistent response, while full-length ride-height adjustment allows vehicle height to be changed without unnecessarily reducing available damper stroke. 32-way simultaneous compression and rebound adjustment provides additional control over ride firmness and handling response.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eFor minimum fitment risk, Fuji Euro Parts recommends this kit for non-M, RWD E46 applications only. E46 M3 models require the dedicated MR-CDK-E46M3-EU kit. AWD\/325xi\/330xi fitment is not guaranteed due conflicting exact-part application data and should be confirmed before ordering.\u003c\/strong\u003e Megan Racing application years are primarily US-market references, so Australian-delivered model years may vary. Professional installation, final hardware torque checks and a complete wheel alignment are strongly recommended. Megan Racing states that its suspension components are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and may not be completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54682669482263,"sku":"MR-CDK-E46-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e46-eu-1.jpg?v=1786668018"},{"product_id":"megan-racing-bmw-e36-spec-rs-coilovers-mr-cdk-e36-rs","title":"Megan Racing Spec-RS Coilovers – BMW E36 3 Series \/ M3 1992–1998 – MR-CDK-E36-RS","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E36-RS Spec-RS Coilover Kit is the track-focused suspension option for the BMW E36 platform, designed for drivers requiring greater damping control and consistency during aggressive driving and circuit use. The Spec-RS system uses external reservoirs to increase oil capacity and provides separate compression and rebound adjustment for more precise suspension tuning than Megan Racing’s Euro-series E36 coilovers.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe kit features 8K front and 12K rear springs, 32 levels of damping adjustment, full-length ride-height adjustment and pillow-ball upper mounting with front camber adjustment. Separate spring-perch and damper-length adjustment allows ride height to be tuned without relying solely on spring preload, while the external-reservoir arrangement is designed to maintain more consistent damping during sustained high-load driving.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eFits BMW E36 3 Series and E36 M3 applications from 1992–1998. 318ti Compact fitment is not specifically confirmed and should be verified before ordering due to its different rear suspension layout.\u003c\/strong\u003e This is a highly adjustable motorsport-oriented suspension system; incorrect reservoir, ride-height or damping adjustment can damage components. Megan Racing Japan specifically warns that damage can occur if the oil-line connection is not correctly handled during height adjustment. \u003cstrong\u003eProfessional installation and setup by an experienced suspension workshop is strongly recommended\u003c\/strong\u003e, followed by final torque checks and a complete wheel alignment. Megan Racing states its products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687236686103,"sku":"MR-CDK-E36-RS","price":2003.23,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e36-rs-1.jpg?v=1786757367"},{"product_id":"megan-racing-bmw-f30-f32-5-stud-coilovers-mr-cdk-bf30-v2","title":"Megan Racing Euro II Coilovers – BMW F30\/F32 RWD 5-Stud – MR-CDK-BF30-V2","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-BF30-V2 Euro II Coilover Kit is designed for compatible BMW F30 3 Series and F32 4 Series models equipped with the 5-stud front strut mounting configuration. The Euro II system provides adjustable ride height, damping and front camber adjustment for improved suspension response, chassis control and alignment tuning.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers provide consistent damping performance, while 32-way simultaneous compression and rebound adjustment allows the suspension firmness to be fine-tuned. Full-length adjustment allows ride height changes while retaining usable damper stroke, and camber-adjustable pillow-ball front top mounts provide additional front alignment control.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003e5-stud front strut and RWD applications only. Vehicles with the 3-stud front strut configuration require MR-CDK-BF30 instead. Excludes M3\/M4 applications, which use Megan Racing’s dedicated F80\/F82 coilover kits.\u003c\/strong\u003e Physically confirm the front top-hat bolt pattern before ordering rather than relying solely on model year. The factory rear upper mounts must be reused. Professional installation, final hardware torque checks and a complete wheel alignment are strongly recommended. Megan Racing states its suspension components are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and may not be completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687236849943,"sku":"MR-CDK-BF30-V2","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bf30-v2_2.jpg?v=1786757388"},{"product_id":"megan-racing-bmw-e92-euro-ii-coilovers-mr-cdk-e92","title":"Megan Racing Euro II Coilovers – BMW E92 3 Series Coupe RWD 2006–2012 – MR-CDK-E92","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E92 Euro II Coilover Kit is designed for rear-wheel-drive BMW E92 3 Series Coupes, providing adjustable ride height, damping and front camber adjustment for improved suspension response and greater control over vehicle stance and alignment. The 8K front and 12K rear spring rates provide a more performance-focused setup while remaining suitable for street and spirited driving applications.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe monotube dampers separate the shock oil and high-pressure gas chamber for consistent damping response, while full-length adjustment allows ride height to be changed without unnecessarily reducing available damper stroke. 32-way simultaneous compression and rebound adjustment allows the suspension firmness and response to be fine-tuned to suit different driving conditions.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eE92 Coupe and RWD only. Does not fit XI\/xDrive AWD models. E92 M3 is not compatible and uses Megan Racing’s dedicated MR-CDK-E92M3 coilover kit.\u003c\/strong\u003e Megan Racing application years are primarily US-market references, so Australian-delivered years may vary slightly. Professional installation, final torque checks and a complete wheel alignment are strongly recommended. Megan Racing states its suspension products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and that components may not be completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687236882711,"sku":"MR-CDK-E92","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e92-1.jpg?v=1786757406"},{"product_id":"megan-racing-bmw-e90-euro-ii-coilovers-mr-cdk-e90","title":"Megan Racing Euro II Coilovers – BMW E90 3 Series Sedan RWD 2006–2011 – MR-CDK-E90","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E90 Euro II Coilover Kit is designed for rear-wheel-drive BMW E90 3 Series Sedans, providing adjustable ride height, damping and front camber adjustment for a more responsive and tuneable suspension setup. The Euro II system uses pillow-ball front top mounts and firmer spring rates than the comfort-oriented Euro I version, making it the more performance-focused option of the two.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers provide consistent damping performance, while 32-way simultaneous compression and rebound adjustment allows suspension firmness to be fine-tuned. Full-length adjustment enables ride height changes while retaining available suspension stroke, and the rear spring height and shock length can be adjusted independently.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eE90 Sedan and RWD only. Does not fit XI\/xDrive AWD models. E90 M3 should use Megan Racing’s dedicated E9x M3 coilover kit and is not recommended for this application.\u003c\/strong\u003e Megan Racing application years are primarily US-market references, so Australian-delivered years may vary. Professional installation, final torque checks and a complete wheel alignment are strongly recommended. Megan Racing classifies its suspension products as \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687237013783,"sku":"MR-CDK-E90","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e90-1.jpg?v=1786757452"},{"product_id":"megan-racing-bmw-e36-euro-ii-coilovers-mr-cdk-e36","title":"Megan Racing Euro II Coilovers – BMW E36 3 Series \/ M3 1992–1998 – MR-CDK-E36","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E36 Euro II Coilover Kit is designed for BMW E36 3 Series and E36 M3 applications, providing adjustable ride height, damping and front camber for a more responsive and tuneable suspension setup. Compared with the softer Euro I kit, the Euro II uses an 8K front \/ 8K rear spring setup together with pillow-ball front top mounts for a more performance-focused feel and greater alignment control.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe monotube dampers feature 32-way simultaneous compression and rebound adjustment, while full-length adjustment allows ride height to be changed while retaining usable damper stroke. Rear spring height and rear shock length can also be adjusted independently, and the front pillow-ball mounts provide camber adjustment for further suspension tuning.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eE36 318ti Compact\/Hatchback is not compatible — Megan Racing supplies the separate MR-CDK-E36TI kit specifically for that model.\u003c\/strong\u003e There is older exact-part documentation limiting MR-CDK-E36 to 6-cylinder E36 models, while Megan Racing’s current manufacturer page simply lists E36 3 Series and M3. For minimum fitment risk, Fuji Euro Parts recommends confirming 4-cylinder non-318ti applications before ordering. Megan Racing application years are primarily US-market references, so Australian model years may vary. Professional installation, final torque checks and a complete wheel alignment are strongly recommended. Megan Racing states its suspension products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and that components may not be fully torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687237112087,"sku":"MR-CDK-E36","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-be36-1.jpg?v=1786757499"},{"product_id":"megan-racing-bmw-e30-51mm-coilovers-mr-cdk-e3051","title":"Megan Racing Euro II Coilovers – BMW E30 51mm Front Strut – MR-CDK-E3051","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E3051 Euro II Coilover Kit is designed for BMW E30 models equipped with the larger 51mm front strut housing. The kit provides adjustable ride height, 32-way damping and front camber adjustment, allowing the suspension to be tuned for vehicle stance, handling response and alignment requirements.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers provide consistent damping performance, while full-length adjustment allows ride height to be altered while retaining usable suspension stroke. Camber-adjustable pillow-ball front top mounts provide additional front alignment adjustment, and the rear spring height and shock length can be adjusted independently.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003e51mm front strut housing ONLY. Physically measure the front strut housing before ordering.\u003c\/strong\u003e Megan Racing specifies this kit for \u003cstrong\u003e1984–1991 6-cylinder E30 models and 1990–1991 4-cylinder E30 models with the 51mm housing.\u003c\/strong\u003e Exact-part installation documentation also states that the \u003cstrong\u003efactory front spindles must be reused and the front strut assemblies require TIG or MIG welding\u003c\/strong\u003e, so installation should be carried out by a qualified suspension\/fabrication workshop. A wheel alignment and final torque\/clearance inspection are required after installation. Megan Racing states its products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and components are not completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687237374231,"sku":"MR-CDK-E3051","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e3051-1.jpg?v=1786757526"},{"product_id":"megan-racing-bmw-e30-318i-45mm-coilovers-mr-cdk-e3045","title":"Megan Racing Euro II Coilovers – BMW E30 318i 45mm Front Strut – MR-CDK-E3045","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E3045 Euro II Coilover Kit is designed specifically for early BMW E30 318i models equipped with the smaller 45mm front strut housing. The system provides adjustable ride height, damping and front camber adjustment for improved suspension response and greater control over vehicle stance and alignment.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers provide consistent damping performance, while 32-way simultaneous compression and rebound adjustment allows the suspension firmness to be fine-tuned. Camber-adjustable pillow-ball front top mounts provide additional front alignment adjustment, while the rear spring height and shock length can be adjusted independently.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003e45mm front strut housing ONLY. Do not order based on E30 chassis alone — physically measure the front strut housing before purchase. Megan Racing lists the larger 51mm E30 application separately as MR-CDK-E3051. Installation requires reuse of the OEM front spindle assemblies and welding of the front strut components; TIG or MIG welding is specified in exact-part installation documentation. Installation should therefore be performed by a suitably qualified suspension\/fabrication workshop.\u003c\/strong\u003e A wheel alignment, final torque inspection and clearance check are required after installation. Megan Racing suspension products are intended for \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687237538071,"sku":"MR-CDK-E3045","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e3045-1.jpg?v=1786757544"},{"product_id":"megan-racing-bmw-f30-f32-euro-ii-coilovers-mr-cdk-bf30","title":"Megan Racing Euro II Coilovers – BMW F30\/F32 RWD 3-Stud – MR-CDK-BF30","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-BF30 Euro II Coilover Kit is designed for compatible rear-wheel-drive BMW F30 3 Series and F32 4 Series models using the 3-stud front strut mounting configuration. The Euro II system combines adjustable ride height, damping and front camber adjustment to provide improved chassis response while retaining a setup suitable for street-oriented performance use.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers separate the shock oil from the high-pressure nitrogen chamber for consistent damping response, while the full-length adjustable design allows ride height to be altered without unnecessarily reducing available damper stroke. The kit uses 6K front and 12K rear springs with 32-way simultaneous compression and rebound adjustment.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eRWD and 3-stud front top-hat vehicles only. Does not fit xDrive\/AWD. Excludes M3 and vehicles equipped with M Suspension \/ EDC.\u003c\/strong\u003e Vehicles with the \u003cstrong\u003e5-stud front strut configuration require MR-CDK-BF30-V2 instead.\u003c\/strong\u003e Confirm the physical front strut mounting pattern before ordering rather than relying on model year alone. Professional installation, final hardware torque checks and a complete wheel alignment are strongly recommended. Megan Racing states its products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and components may not be completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687237701911,"sku":"MR-CDK-BF30","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bf30.jpg?v=1786757571"},{"product_id":"riaction-bmw-e36-coilovers-ri-bm-010-lt","title":"Riaction Performance Coilovers – BMW E36 3 Series Non-M 1992–1998 – RI-BM-010-LT","description":"\u003cp\u003e\u003cstrong\u003eThe Riaction Performance RI-BM-010-LT Coilover Kit is designed for non-M BMW E36 3 Series models, providing adjustable ride height, increased suspension control and sharper handling while maintaining a street-oriented ride. Riaction uses a monotube damper design with precision-machined aluminium components and an electroplated carbon-steel shock body for durability and consistent damping performance.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFull-length ride-height adjustment allows the vehicle stance to be changed while retaining usable damper travel, while 32 levels of damping adjustment allow the suspension response to be fine-tuned for daily driving, spirited road use or a firmer performance setup. The standard kit uses matched 8K front and 8K rear SAE9254 cold-wound springs and is fully rebuildable through Riaction Performance Shocks.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eNon-M E36 applications only. Does not fit E36 M3 — Riaction manufactures a separate BM-034-LT kit specifically for E36 M3 models.\u003c\/strong\u003e Fitment for the \u003cstrong\u003e318ti Compact is not clearly confirmed by Riaction\u003c\/strong\u003e, and because the Compact uses a different rear suspension layout, Fuji Euro Parts recommends \u003cstrong\u003enot ordering this kit for a 318ti unless compatibility is confirmed first\u003c\/strong\u003e. Professional installation, final hardware torque checks and a complete wheel alignment are recommended after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687238029591,"sku":"RI-BM-010-LT","price":1503.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/RI-BM-010-LT.jpg?v=1786757620"},{"product_id":"riaction-bmw-e90-rwd-coilovers-ri-bm-003-lt","title":"Riaction Performance Coilovers – BMW E90 3 Series RWD 2006–2011 – RI-BM-003-LT","description":"\u003cp\u003e\u003cstrong\u003eThe Riaction Performance RI-BM-003-LT Coilover Kit is designed specifically for rear-wheel-drive BMW E90 3 Series models, providing adjustable ride height, increased suspension control and improved handling while retaining a street-focused level of comfort. Riaction uses a monotube damper design with high-quality carbon-steel and aluminium components for consistent damping performance and durability.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFull-length ride-height adjustment allows the vehicle stance to be changed independently of damper stroke, while 32 levels of damping adjustment allow the suspension response to be fine-tuned from softer street settings through to firmer performance setups. The kit uses 8K front and 12K rear SAE9254 cold-wound springs and is fully rebuildable through Riaction Performance Shocks.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eBMW E90, non-M and RWD only. Does not fit M3 or XI\/xDrive\/AWD models.\u003c\/strong\u003e Confirm chassis and drivetrain before ordering. Coilover installation significantly alters suspension geometry and ride height, so professional installation, final hardware torque checks and a complete wheel alignment are strongly recommended before vehicle use.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687238783255,"sku":"RI-BM-003-LT","price":1503.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/RI-BM-003-LT.jpg?v=1786757676"},{"product_id":"riaction-bmw-f30-f32-rwd-coilovers-ri-bm-001-lt","title":"Riaction Performance Coilovers – BMW F30\/F32 RWD – RI-BM-001-LT","description":"\u003cp\u003e\u003cstrong\u003eThe Riaction Performance RI-BM-001-LT Coilover Kit is designed for compatible rear-wheel-drive BMW F30 3 Series and F32 4 Series models, providing adjustable ride height, increased suspension control and a more responsive handling setup while retaining a street-oriented ride. The monotube damper design uses quality carbon-steel and aluminium components for consistent damping and durability.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFull-length ride-height adjustment allows the vehicle stance to be changed independently of the damper stroke, while 32 levels of damping adjustment provide control over ride firmness and handling response. The kit uses 8K front and 12K rear SAE9254 cold-wound springs and is fully rebuildable through Riaction Performance Shocks.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eRWD only. Excludes AWD\/xDrive and M3\/M4 applications. Front top-mount configuration must also be confirmed before ordering, as Riaction lists both 3-bolt and 5-bolt top-hat versions of the underlying BM-001-LT kit depending on vehicle production date. Do not order based on model year alone where the mounting configuration is uncertain.\u003c\/strong\u003e Professional installation, final torque checks and a complete wheel alignment are recommended after installation. Riaction states its products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687238881559,"sku":"RI-BM-001-LT","price":1503.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/RI-BM-001-LT.jpg?v=1786757699"},{"product_id":"megan-racing-bmw-e90-euro-i-coilovers-mr-cdk-e90-eu","title":"Megan Racing Euro I Coilovers – BMW E90 3 Series Sedan RWD 2006–2011 – MR-CDK-E90-EU","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E90-EU Euro I Coilover Kit is designed for BMW E90 Sedan owners wanting adjustable ride height and improved suspension response while retaining a more comfortable, street-oriented setup. Rubber-insulated front top mounts and the OE-style rear mounting arrangement help isolate road noise and vibration compared with more aggressive pillow-ball mounting systems.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers separate the damper oil from the high-pressure nitrogen chamber for consistent damping response, while full-length ride-height adjustment allows vehicle height to be changed without unnecessarily reducing available damper stroke. 32-way simultaneous compression and rebound adjustment provides additional control over ride firmness and chassis response.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eE90 Sedan and RWD only. Does not fit XI\/xDrive AWD models or E90 M3.\u003c\/strong\u003e Megan Racing sells separate coilover kits for E90 AWD and E9x M3 applications. Megan Racing application years are primarily US-market references, so Australian-delivered model years may vary. Professional installation, final hardware torque checks and a complete wheel alignment are strongly recommended. Megan Racing states its suspension products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and components may not be fully torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687239242007,"sku":"MR-CDK-E90-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e90-eu-1.jpg?v=1786757718"},{"product_id":"megan-racing-bmw-e90-e92-e93-m3-edc-coilovers-mr-cdk-e92m3-eu","title":"Megan Racing Euro I Coilovers – BMW E90\/E92\/E93 M3 with EDC – MR-CDK-E92M3-EU","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E92M3-EU Euro I Coilover Kit is designed specifically for E90, E92 and E93 BMW M3 models equipped with factory EDC. The Euro I range prioritises a balance of ride comfort, adjustable ride height and improved suspension control, making it suitable for drivers wanting a more performance-focused setup without moving to an excessively stiff track-oriented coilover.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe kit uses monotube dampers with full-length ride-height adjustment, allowing vehicle height to be changed independently of damper stroke. 32-way simultaneous compression and rebound adjustment provides control over ride firmness and chassis response, while the 7K front and 14K rear spring rates are matched specifically to the E9x M3 platform. Rubber-insulated front mounts help reduce additional road noise and vibration compared with solid pillow-ball mounting arrangements.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eFactory EDC-equipped M3 models only. Megan Racing explicitly states that this kit does NOT fit non-EDC vehicles.\u003c\/strong\u003e The EDC specification refers to vehicle compatibility; owners should confirm any EDC warning\/cancellation requirements with their installer before installation. Megan Racing application years are primarily US-market references, so Australian model years can vary. Professional installation, final hardware torque checks and a complete wheel alignment are strongly recommended. Megan Racing suspension products are designated \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and components may not be completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54687239504151,"sku":"MR-CDK-E92M3-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e92m3-eu-1.jpg?v=1786757740"},{"product_id":"megan-racing-bmw-e92-euro-i-coilovers-mr-cdk-e92-eu","title":"Megan Racing Euro I Coilovers – BMW E92 3 Series Coupe RWD 2006–2012 – MR-CDK-E92-EU","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E92-EU Euro I Coilover Kit is designed for BMW E92 Coupe owners wanting adjustable ride height and improved handling while retaining a more comfortable, street-oriented suspension setup. Rubber-insulated front top mounts and the OE-style rear mounting arrangement help isolate road noise and vibration compared with more aggressive pillow-ball mounting systems.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers separate the damper oil from the high-pressure nitrogen chamber for consistent damping response, while full-length ride-height adjustment allows vehicle height to be changed without unnecessarily reducing available damper stroke. Adjustable damping provides additional control over ride firmness and chassis response.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eE92 Coupe and RWD only. Does not fit XI\/xDrive AWD models or E92 M3.\u003c\/strong\u003e Megan Racing lists a separate \u003ccode\u003eMR-CDK-E92M3-EU\u003c\/code\u003e kit for the E92 M3. Megan Racing application years are primarily US-market references, so Australian model years may vary slightly. Professional installation, final torque checks and a complete wheel alignment are strongly recommended. Megan Racing suspension components are designated \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and may not be fully torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687239569687,"sku":"MR-CDK-E92-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e92-eu-1.jpg?v=1786757756"},{"product_id":"megan-racing-bmw-e36-318ti-coilovers-mr-cdk-e36ti","title":"Megan Racing Euro II Coilovers – BMW E36 318ti Compact 1994–1998 – MR-CDK-E36TI","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E36TI Euro II Coilover Kit is specifically designed for the BMW E36 318ti Compact, using suspension components tailored to the Compact’s different rear suspension layout rather than the standard E36 3 Series setup. The kit provides adjustable ride height, damping and front camber for drivers looking to improve handling response while maintaining a relatively street-friendly spring setup.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMonotube dampers provide consistent damping performance, while separate spring perch and shock-length adjustment allows ride height to be changed while retaining useful suspension stroke. Camber-adjustable pillow-ball front top mounts provide additional front alignment adjustment, and the 6K front \/ 6K rear spring rates give this kit a more balanced setup specifically for the 318ti.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003e318ti Compact\/Hatchback only. Do not use this kit for standard E36 Coupe, Sedan, Convertible or Touring applications — Megan Racing lists separate E36 coilover kits for those vehicles.\u003c\/strong\u003e Megan Racing’s application years are primarily market-specific and can vary between countries, so Australian-delivered vehicles should be confirmed by chassis and suspension configuration rather than registration year alone. Professional installation, final torque checks and a wheel alignment are strongly recommended. Megan Racing states its suspension products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and components may not be completely torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687272861975,"sku":"MR-CDK-E36TI","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e36ti-1.jpg?v=1786759067"},{"product_id":"megan-racing-bmw-e36-euro-i-coilovers-mr-cdk-e36-eu","title":"Megan Racing Euro I Coilovers – BMW E36 3 Series \/ M3 1992–1998 – MR-CDK-E36-EU","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-E36-EU Euro I Coilover Kit is designed for BMW E36 owners wanting adjustable ride height and improved suspension response while retaining a more street-friendly ride than Megan Racing’s more aggressive coilover ranges. Rubber-isolated front top mounts and the factory-style rear mounting arrangement help reduce noise and vibration entering the cabin.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThe monotube dampers use separate oil and high-pressure nitrogen chambers for consistent damping response, while full-length ride-height adjustment allows the vehicle height to be changed without unnecessarily reducing available damper stroke. Adjustable damping provides additional control over ride firmness and handling response.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eFits standard E36 3 Series and E36 M3 applications. Excludes 318ti Compact\/Hatchback — Megan Racing lists MR-CDK-E36TI as the dedicated 318ti kit.\u003c\/strong\u003e Megan Racing application years are primarily US-market references, so Australian-delivered model years may vary. Professional installation, final hardware torque checks and a wheel alignment are strongly recommended. Megan Racing states its suspension products are \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e and notes components may not be fully torqued when supplied.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687303205143,"sku":"MR-CDK-E36-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e36-eu_1.jpg?v=1786759351"},{"product_id":"megan-racing-bmw-f30-f32-euro-i-coilovers-mr-cdk-bf30-eu","title":"Megan Racing Euro I Coilovers – BMW F30 3 Series \/ F32 4 Series RWD – MR-CDK-BF30-EU","description":"\u003cp\u003e\u003cstrong\u003eThe Megan Racing MR-CDK-BF30-EU Euro I Coilover Kit is designed for drivers who want a lower stance and improved handling while retaining a more comfortable, street-oriented ride. Megan Racing uses rubber-insulated front top mounts together with the factory-style rear mounting arrangement to help reduce road noise and vibration compared with more aggressive pillow-ball setups.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe monotube dampers use separate oil and high-pressure nitrogen chambers to improve damping consistency and response. Full-length ride-height adjustment allows the vehicle to be lowered without sacrificing shock stroke, while adjustable damping lets the suspension be fine-tuned for comfort, spirited road driving or more performance-focused use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eImportant Fitment \u0026amp; Installation Notes: \u003cstrong\u003eRWD models only. Requires the 3-stud front top-hat configuration. Excludes M3 and vehicles equipped with M Suspension \/ EDC.\u003c\/strong\u003e Confirm front strut\/top-mount configuration before ordering. Megan Racing suspension products are designated \u003cstrong\u003eOff-Road Use Only\u003c\/strong\u003e, and Megan states components may not be completely torqued when supplied. Fuji Euro Parts recommends professional installation, final torque checks and a complete wheel alignment after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54687306580247,"sku":"MR-CDK-BF30-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bf30-eu.jpg?v=1786759374"},{"product_id":"megan-racing-bmw-g20-g21-g22-euro-i-coilovers-mr-cdk-bg20-eu","title":"Megan Racing Euro I Coilovers – BMW 3 Series G20\/G21 2019+ \u0026 4 Series G22 2021+ – MR-CDK-BG20-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed to provide adjustable ride height and damping while retaining a more street-focused level of comfort. The full-length adjustable design allows ride height changes without relying solely on spring preload, while monotube dampers and 32-way simultaneous compression\/rebound adjustment allow the suspension response to be fine-tuned for street, spirited driving or track-oriented setups.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit retains the factory front and rear strut\/shock top mounts, helping isolate additional road noise compared with solid aftermarket upper mounts. Spring rates are 6 kgf\/mm front and 11 kgf\/mm rear.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e Megan Racing lists this same part number for both the BMW G20\/G21 3 Series and G22 4 Series. M models are excluded. Factory front and rear top mounts must be reused. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and states that suspension components must be correctly installed. Their application years are based primarily on US-market vehicles, so Australian-market model year and specification should be confirmed before purchase.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54819478274327,"sku":"MR-CDK-BG20-EU-ii","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bg20-eu_1.jpg?v=1787812134"},{"product_id":"megan-racing-bmw-e82-euro-ii-coilovers-mr-cdk-e82","title":"Megan Racing Euro II Coilovers – BMW 1 Series E82 2008–2013 – MR-CDK-E82","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro II Series coilovers are designed as a more performance-focused suspension upgrade for the BMW E82 1 Series, offering 32-way simultaneous compression and rebound damping adjustment, full-length ride-height adjustment and camber-adjustable pillow-ball front top mounts. The design allows ride height to be altered independently of spring preload, helping retain usable suspension travel while giving greater control over handling balance and stance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit uses monotube dampers, SAE 9254 cold-wound steel springs and independently adjustable rear spring height and shock length. Front spring rate is 8 kgf\/mm and rear spring rate is 12 kgf\/mm.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant fitment note:\u003c\/strong\u003e Megan Racing USA specifically lists this kit for the \u003cstrong\u003eBMW E82 1 Series, 2008–2013\u003c\/strong\u003e. The E82 1M uses the separate \u003cstrong\u003eMR-CDK-E821M\u003c\/strong\u003e coilover kit; \u003cstrong\u003eMR-CDK-E82 is not compatible with the 1M\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and states they must be installed and set up correctly. Megan also notes that its listed application years are based on US-market vehicles, so Australian-market build dates\/specifications should be confirmed before ordering.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54819484041495,"sku":"MR-CDK-E82","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e82-1.jpg?v=1787812477"},{"product_id":"megan-racing-bmw-e82-euro-i-coilovers-mr-cdk-e82-eu","title":"Megan Racing Euro I Coilovers – BMW 1 Series E82 Coupe 2008–2013 – MR-CDK-E82-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for drivers wanting adjustable ride height and damping while retaining a more comfort-focused street setup. Compared with Megan Racing’s more performance-oriented Euro II kit, the Euro I system uses rubber-isolated front top mounts and the factory rear upper mounts to help reduce additional noise and harshness entering the cabin.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe monotube dampers feature full-length ride-height adjustment, allowing vehicle height to be changed without relying solely on spring preload, along with 32-way simultaneous compression and rebound damping adjustment. Spring rates are 7 kgf\/mm front and 12 kgf\/mm rear, providing increased chassis control while remaining aimed at comfortable street-oriented use.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e This kit is specifically listed by Megan Racing USA for the \u003cstrong\u003eBMW E82 1 Series Coupe, 2008–2013\u003c\/strong\u003e. The E82 1M uses the separate Megan Racing coilover part number \u003ccode\u003eMR-CDK-E821M\u003c\/code\u003e; \u003cstrong\u003ethis kit is not compatible with the 1M\u003c\/strong\u003e. Megan Racing's application years are based on US-market vehicles, so Australian-market build dates and specifications should be confirmed before purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and requires correct installation and setup. Improper installation, abuse or modification may affect the manufacturer's warranty.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54819485810967,"sku":"MR-CDK-E82-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e82-eu-1.jpg?v=1787812492"},{"product_id":"megan-racing-bmw-f22-m235i-euro-ii-coilovers-mr-cdk-bf22","title":"Megan Racing Euro II Coilovers – BMW F22 M235i 2014–2017 – MR-CDK-BF22","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro II Series coilovers are a performance-focused suspension upgrade for the BMW F22 M235i, combining full-length ride-height adjustment with 32-way simultaneous compression and rebound damping adjustment. Camber-adjustable pillow-ball front top mounts provide additional front alignment control, while independent shock-length adjustment allows ride height to be altered while retaining usable suspension stroke.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit uses monotube dampers and SAE 9254 cold-wound steel springs, with 8 kgf\/mm front and 14 kgf\/mm rear spring rates. Megan Racing positions the Euro II system toward more performance-oriented street and track setups than its softer Euro I alternative.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e Megan Racing specifically lists \u003cstrong\u003eBMW F22 M235i, 2014–2017\u003c\/strong\u003e for this exact part number. Do not assume fitment for 220i, 228i, 230i or M240i simply because they share the F22 chassis. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing designates this product \u003cstrong\u003efor off-road use only\u003c\/strong\u003e. Suspension installation and setup should be carried out correctly, with a professional wheel alignment performed after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54819486105879,"sku":"MR-CDK-BF22","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bf22-1.jpg?v=1787812509"},{"product_id":"megan-racing-bmw-f22-euro-i-coilovers-mr-cdk-bf22-eu","title":"Megan Racing Euro I Coilovers – BMW 2 Series F22 2014–2017 (Excl. EDC) – MR-CDK-BF22-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for drivers wanting adjustable ride height and damping with greater emphasis on street comfort than the more performance-focused Euro II system. Rubber-isolated front top mounts and reuse of the factory rear upper mounts help limit additional road noise and harshness entering the cabin, while increased spring rates and sport-oriented damper valving provide improved chassis control.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe monotube dampers feature full-length ride-height adjustment, allowing vehicle height to be changed without relying solely on spring preload, together with 32-way simultaneous compression and rebound damping adjustment. The kit uses 6 kgf\/mm front and 12 kgf\/mm rear spring rates.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e Megan Racing lists this kit for \u003cstrong\u003eBMW F22 2 Series models from 2014–2017 and specifically excludes vehicles equipped with Electronic Damper Control (EDC) \/ adaptive electronic damping.\u003c\/strong\u003e The manufacturer lists F22 rather than F23, so the convertible should not be added without further confirmation. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and requires correct installation and setup. Megan also states that its application years are based on US-market vehicles, so Australian-market model\/build year should be verified before purchase.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54819486433559,"sku":"MR-CDK-BF22-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bf22-ez-n-1.jpg?v=1787812524"},{"product_id":"megan-racing-bmw-e39-euro-ii-coilovers-mr-cdk-e39","title":"Megan Racing Euro II Coilovers – BMW 5 Series E39 1997–2003 (Excl. M5\/Wagon\/Air Suspension) – MR-CDK-E39","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro II Series coilovers provide a performance-focused suspension upgrade for the BMW E39 5 Series, combining adjustable ride height with 32-way simultaneous compression and rebound damping adjustment. The monotube damper design separates the oil and pressurised gas chambers for more consistent damping response, while full-length adjustment allows ride height to be changed without relying solely on spring preload.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit uses 6 kgf\/mm front and 5 kgf\/mm rear spring rates, camber-adjustable pillow-ball front top mounts, and independently adjustable rear spring height and shock length. This provides substantially greater suspension setup control than the factory system while retaining usable damper travel across a range of ride heights.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e Designed for BMW E39 5 Series sedan models from 1997–2003. \u003cstrong\u003eDoes not fit M5, Touring\/Wagon models, or vehicles equipped with factory air\/self-levelling suspension.\u003c\/strong\u003e Confirm the vehicle's suspension configuration before ordering. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing suspension components are intended for performance\/off-road use and should be professionally installed and correctly adjusted. A wheel alignment should be performed after installation.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54819487449367,"sku":"MR-CDK-E39","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e39-1.jpg?v=1787812573"},{"product_id":"riaction-bmw-e60-5-series-coilovers-ri-bm-004-lt","title":"Riaction LT Coilovers – BMW 5 Series E60 2004–2010 RWD (Excl. M5\/AWD) – RI-BM-004-LT","description":"\u003cp\u003e\u003cstrong\u003eRiaction Performance Shocks LT coilovers are designed to lower the BMW E60 5 Series while providing increased suspension control and adjustable damping for a balance of street comfort and performance. The system combines full-length ride-height adjustment with 32 levels of damping adjustment, allowing the suspension response and vehicle height to be tuned to suit the desired setup.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe dampers use a monotube design with a 52 mm electroplated carbon-steel shock body and 44 mm high-flow CNC-machined 6061 aluminium piston. SAE 9254 cold-wound springs are rated at 8 kgf\/mm front and 6 kgf\/mm rear. The dampers are also fully rebuildable through Riaction Performance Shocks.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e This kit is manufacturer-listed for \u003cstrong\u003eBMW E60 5 Series 2004–2010 RWD\u003c\/strong\u003e, excluding M and all-wheel-drive applications. \u003cstrong\u003eM5 and xDrive\/xi models are not compatible.\u003c\/strong\u003e E61 Touring fitment is not manufacturer-confirmed for this SKU and should be verified before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing's general suspension disclaimer states its suspension products are deemed \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and must be correctly installed. It also notes that application years are based on US-market vehicles, which can differ from Australian-market model years.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54819487875351,"sku":"RI-BM-004-LT","price":1503.36,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/RI-BM-004-LT.jpg?v=1787812593"},{"product_id":"megan-racing-bmw-g60-rwd-euro-i-coilovers-mr-cdk-bg60-eu","title":"Megan Racing Euro I Coilovers – BMW 5 Series G60 2023+ RWD (Excl. M5\/AWD) – MR-CDK-BG60-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for the BMW G60 5 Series with an emphasis on retaining street comfort while providing adjustable ride height and damping. Rubber front top mounts and reuse of the factory rear top mounts help isolate additional road noise, while sport-oriented damper valving and increased spring rates provide improved chassis control for spirited driving.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit uses monotube dampers with full-length ride-height adjustment and 30-way simultaneous compression and rebound damping adjustment. Spring rates are 9 kgf\/mm front and 4.2 kgf\/mm rear.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant EDC note:\u003c\/strong\u003e If the vehicle is equipped with BMW’s electronic damper system, installation of this coilover kit removes that damper functionality and Megan Racing states that a dashboard error will occur. A suitable third-party electronic damper cancellation\/delete solution may therefore be required. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e This exact SKU is manufacturer-listed for \u003cstrong\u003eBMW G60 5 Series 2023+ RWD only\u003c\/strong\u003e and excludes M5\/AWD applications. Megan Racing manufactures a separate \u003ccode\u003eMR-CDK-BG60X-EU\u003c\/code\u003e kit specifically for G60 AWD models, so the two should not be mixed. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and states that installation and setup are the installer’s responsibility. Megan also notes that its listed model years are based on US-market vehicles and can differ from other markets, including Australia.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54819488039191,"sku":"MR-CDK-BG60-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bg60-eu-scaled.jpg?v=1787812624"},{"product_id":"megan-racing-bmw-g60-xdrive-euro-i-coilovers-mr-cdk-bg60x-eu","title":"Megan Racing Euro I Coilovers – BMW 5 Series G60 2023+ xDrive\/AWD (Excl. M5) – MR-CDK-BG60X-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers for the BMW G60 5 Series xDrive\/AWD are designed to provide adjustable ride height and damping while retaining a more street-focused level of comfort. Rubber-isolated front top mounts and reuse of the factory rear top mounts help reduce additional road noise and harshness, while sport-oriented damper valving and increased spring rates provide improved chassis control.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe system uses monotube dampers with full-length ride-height adjustment and 30-way simultaneous compression and rebound damping adjustment. Spring rates are 9 kgf\/mm front and 4.2 kgf\/mm rear.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectronic damper warning:\u003c\/strong\u003e If the vehicle is equipped with BMW’s factory Electronic Damper System, installing this coilover kit removes that damper functionality and Megan Racing states that a dashboard error will occur. A suitable third-party cancellation\/delete solution may therefore be required. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and requires correct installation and setup. Megan also states that its application years are based on US-market vehicles, so Australian-market model year and specification should be verified before purchase. \u003c\/p\u003e\n","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54819488366871,"sku":"MR-CDK-BG60X-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bg60x-eu_1_-scaled.jpg?v=1787812644"},{"product_id":"megan-racing-bmw-g30-g31-rwd-coilovers-mr-cdk-bg30-eu","title":"Megan Racing Euro I Coilovers – BMW 5 Series G30\/G31 2017+ RWD (Excl. M5\/xDrive) – MR-CDK-BG30-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for the BMW G30\/G31 5 Series with an emphasis on maintaining street comfort while adding adjustable ride height and damping control. The monotube dampers use full-length adjustment so ride height can be altered without relying solely on spring preload, while the factory front and rear upper mounts are retained to help reduce additional noise and harshness entering the cabin.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpring rates are 10 kgf\/mm front and 6 kgf\/mm rear, with adjustable compression and rebound damping. Megan Racing lists this exact kit for rear-wheel-drive applications only; xDrive\/AWD models are not compatible.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e Megan Racing USA specifically lists \u003cstrong\u003e530i\/540i G30 RWD 2017+\u003c\/strong\u003e, while Megan Racing Japan independently lists the same \u003ccode\u003eMR-CDK-BG30-EU\u003c\/code\u003e part number for the broader \u003cstrong\u003eG30\/G31 5 Series platform\u003c\/strong\u003e and explicitly states AWD is not compatible. Because Australian-market engine\/body combinations differ from the US market, vehicle chassis and drivetrain should be confirmed before ordering. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and states that installation and setup are the installer’s responsibility. Their published application years are US-market based and can differ in other markets.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54819488596247,"sku":"MR-CDK-BG30-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bg30-eu-1.jpg?v=1787812669"},{"product_id":"megan-racing-bmw-e39-euro-i-coilovers-mr-cdk-e39-eu","title":"Megan Racing Euro I Coilovers – BMW 5 Series E39 Sedan 1997–2003 (Excl. M5\/Wagon\/Air Suspension) – MR-CDK-E39-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for the BMW E39 5 Series with a stronger emphasis on street comfort than the more performance-focused Euro II setup. Rubber-isolated front top mounts and reuse of the factory rear upper mounts help reduce additional road noise and harshness, while sport-oriented damper valving and increased spring rates provide improved body control and handling response.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe monotube dampers feature full-length ride-height adjustment, allowing vehicle height to be changed without relying solely on spring preload. Damping is adjustable through a single control affecting compression and rebound simultaneously, with 7 kgf\/mm front and 5 kgf\/mm rear spring rates.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e This kit is specifically listed for \u003cstrong\u003eBMW E39 5 Series sedan models from 1997–2003\u003c\/strong\u003e and \u003cstrong\u003edoes not fit the E39 M5, Touring\/Wagon, or vehicles equipped with factory air\/self-levelling suspension\u003c\/strong\u003e. These exclusions are stated by Megan Racing and are independently repeated by specialist distributors. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing designates its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e. Products must be installed and set up correctly; abuse, over-use or modification can void the manufacturer's 1-year warranty. Megan also notes that its application years are based on US-market vehicles, so Australian-market model\/build year should be confirmed before purchase.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54819488825623,"sku":"MR-CDK-E39-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e39-eu-1.jpg?v=1787812688"},{"product_id":"megan-racing-bmw-e60-euro-i-coilovers-mr-cdk-e60-eu","title":"Megan Racing Euro I Coilovers – BMW 5 Series E60 2004–2010 RWD (Excl. M5\/AWD) – MR-CDK-E60-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for the BMW E60 5 Series with an emphasis on retaining street comfort while adding adjustable ride height and damping control. Rubber-isolated front top mounts and reuse of the factory rear upper mounts help reduce additional road noise and harshness, while sport-tuned damper valving and increased spring rates provide improved chassis control.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe monotube dampers feature full-length ride-height adjustment, allowing vehicle height to be changed without relying solely on spring preload. Damping is adjustable through 32 levels of simultaneous compression and rebound adjustment, with 6 kgf\/mm front and 5 kgf\/mm rear spring rates.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e Megan Racing USA specifically lists this kit for \u003cstrong\u003eBMW E60 5 Series 2004–2010\u003c\/strong\u003e, excluding \u003cstrong\u003eM5, Xi and AWD\/xDrive models\u003c\/strong\u003e. Megan Racing Japan also catalogues the exact SKU under E60\/E61, but because E61 Touring suspension configurations can differ, Fuji Euro Parts recommends confirming E61 fitment before purchase rather than assuming wagon compatibility. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and states that suspension components must be correctly installed and set up. Manufacturer application years are based on US-market vehicles and can differ from Australian-market model years. \u003c\/p\u003e\n","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54819489022231,"sku":"MR-CDK-E60-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e60-eu-1.jpg?v=1787812709"},{"product_id":"megan-racing-bmw-f10-f11-rwd-euro-i-coilovers-mr-cdk-bf10-eu","title":"Megan Racing Euro I Coilovers – BMW 5 Series F10\/F11 2011–2017 RWD (Excl. M5\/xDrive) – MR-CDK-BF10-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for the BMW F10\/F11 5 Series with a street-oriented focus, offering adjustable ride height and damping while retaining a more comfortable ride than Megan Racing’s firmer performance-focused setups. Rubber-isolated front top mounts and use of the factory rear upper mounts help reduce additional road noise and harshness, while monotube dampers provide consistent response and improved chassis control.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit uses full-length ride-height adjustment so vehicle height can be altered without relying solely on spring preload, together with 32-way simultaneous compression and rebound damping adjustment. Spring rates are 10 kgf\/mm front and 4.5 kgf\/mm rear.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e Megan Racing USA lists this exact kit for \u003cstrong\u003eBMW F10 5 Series 2011–2017, RWD only, excluding M5\u003c\/strong\u003e. Megan Racing Japan independently lists the same \u003ccode\u003eMR-CDK-BF10-EU\u003c\/code\u003e part number for both \u003cstrong\u003eF10 and F11\u003c\/strong\u003e, so F11 Touring fitment has direct manufacturer support as well. xDrive\/AWD models should not be included because Megan USA specifically limits the kit to RWD. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing suspension products should be installed and set up correctly, and a wheel alignment should be performed after installation. Megan Racing’s suspension disclaimer classifies these products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e, and application years may reflect US-market vehicles, so Australian-market chassis and drivetrain should be confirmed before purchase.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54819489054999,"sku":"MR-CDK-BF10-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bf10-eu-1.jpg?v=1787812731"},{"product_id":"megan-racing-bmw-f06-6-series-gran-coupe-coilovers-mr-cdk-bf06","title":"Megan Racing Euro Series Coilovers – BMW F06 6 Series Gran Coupe 2013–2018 (Excl. M6\/EDC) – MR-CDK-BF06","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro Series coilovers are designed for the BMW F06 6 Series Gran Coupe with a balance of adjustable suspension performance and street-oriented ride quality. The monotube damper design separates the oil and pressurised gas chambers for consistent damping response, while full-length ride-height adjustment allows the vehicle to be lowered without relying solely on spring preload.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe system provides 32-way simultaneous compression and rebound damping adjustment and uses rubber-isolated front top mounts with the factory rear upper mounts to help reduce additional noise and harshness entering the cabin.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant fitment note:\u003c\/strong\u003e Megan Racing's exact application for \u003ccode\u003eMR-CDK-BF06\u003c\/code\u003e is the \u003cstrong\u003eBMW F06 6 Series Gran Coupe 2013–2018\u003c\/strong\u003e. It \u003cstrong\u003edoes not fit the M6 Gran Coupe and is not compatible with EDC-equipped vehicles\u003c\/strong\u003e. Fitment is limited to the F06 Gran Coupe; F12 Convertible and F13 Coupe applications are not confirmed for this SKU.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and states that they must be correctly installed and set up. Its published application years are based on US-market vehicles, so Australian-market model year and equipment should be confirmed before purchase.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54819500917015,"sku":"MR-CDK-BF06","price":1376.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-bf06-1.jpg?v=1787813019"},{"product_id":"megan-racing-bmw-e63-e64-euro-i-coilovers-mr-cdk-e63-eu","title":"Megan Racing Euro I Coilovers – BMW 6 Series E63\/E64 2004–2010 (Excl. M6) – MR-CDK-E63-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for the BMW E63\/E64 6 Series with an emphasis on maintaining street comfort while adding adjustable ride height and damping control. Rubber-isolated front top mounts and reuse of the factory rear upper mounts help reduce additional road noise and harshness, while sport-tuned damper valving provides improved chassis control for spirited driving.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe monotube dampers feature full-length ride-height adjustment, allowing vehicle height to be altered without relying solely on spring preload. The kit uses 9 kgf\/mm front and 6 kgf\/mm rear spring rates with 32-way simultaneous compression and rebound damping adjustment.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment note:\u003c\/strong\u003e Megan Racing directly lists this exact kit for \u003cstrong\u003eBMW E63 Coupe and E64 Convertible 6 Series models from 2004–2010, excluding M6\u003c\/strong\u003e. The same E63\/E64 application is independently confirmed in Megan Racing Japan’s current catalogue. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and states that suspension components must be correctly installed and set up. Manufacturer-listed years are based on US-market applications and may differ from Australian-market build\/model years, so exact vehicle specification should be confirmed before purchase.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54819501441303,"sku":"MR-CDK-E63-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-e63-eu-1.jpg?v=1787813037"},{"product_id":"megan-racing-bmw-f13-rwd-euro-i-coilovers-mr-cdk-f13-eu","title":"Megan Racing Euro I Coilovers – BMW 6 Series F13 Coupe 2011–2018 RWD – MR-CDK-F13-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for the BMW F13 6 Series Coupe with a greater emphasis on street comfort while still providing adjustable ride height and damping control. Rubber-isolated front top mounts and reuse of the factory rear mounts help limit additional road noise and harshness, while sport-tuned damping provides improved chassis control for spirited driving.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe system uses monotube dampers with full-length ride-height adjustment, allowing vehicle height to be changed without relying solely on spring preload. Spring rates are 12 kgf\/mm front and 4.5 kgf\/mm rear, with 32-way simultaneous compression and rebound damping adjustment.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant fitment note:\u003c\/strong\u003e Megan Racing specifically lists this kit for the \u003cstrong\u003eBMW F13 6 Series 2-door Coupe, 2011–2018, RWD only\u003c\/strong\u003e. \u003cstrong\u003eF12 Convertible, F06 Gran Coupe and xDrive\/AWD models are not included in this fitment.\u003c\/strong\u003e Confirm exact chassis, drivetrain and equipment before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and requires proper installation and setup. Its listed application years are based primarily on US-market vehicles, so Australian-market model\/build year and equipment should be confirmed before purchase.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54819501670679,"sku":"MR-CDK-F13-EU","price":1314.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-f13-eu-1.jpg?v=1787813054"},{"product_id":"megan-racing-audi-a3-s3-8v-awd-euro-ii-coilovers-mr-cdk-aa314-aw","title":"Megan Racing Euro II Coilovers – Audi A3\/S3 8V AWD 2014+ – MR-CDK-AA314-AW","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro II Series coilovers provide adjustable ride height and damping for AWD Audi A3 and S3 8V models, with a sport-focused setup suited to drivers looking for greater suspension control and adjustability. The monotube dampers feature 32-way simultaneous compression and rebound adjustment, allowing the damping response to be fine-tuned for different road conditions and driving preferences.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull-length damper adjustment allows ride height to be changed independently of spring preload, helping retain usable suspension travel. The kit uses 8 kgf\/mm front and 6 kgf\/mm rear springs, independently adjustable rear spring height and shock length, and camber-adjustable pillowball front upper mounts. Megan Racing uses SAE-9254 cold-wound steel springs and backs the kit with a 1-year warranty against manufacturer defects.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Usage Notes:\u003c\/strong\u003e This kit is for \u003cstrong\u003eAWD \/ quattro applications only\u003c\/strong\u003e. Megan Racing USA lists Audi A3 and S3 AWD models from 2014+, while Megan Racing Japan lists the A3 8V application as 2015–2020 and the S3 as 2014+. Megan Racing states that its published application years are based on US-market vehicles and may differ from other markets, so Australian vehicle build date, chassis and drivetrain should be confirmed before ordering. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and requires correct installation and setup. Its warranty documentation also notes that components may not be completely torqued out of the box, so all hardware and settings should be checked during installation. Professional installation is recommended.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54826995286295,"sku":"MR-CDK-AA314-AW","price":989.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-aa314-aw-1.jpg?v=1787894460"},{"product_id":"megan-racing-audi-a3-s3-8v-awd-euro-i-coilovers-mr-cdk-aa314-aw-eu","title":"Megan Racing Euro I Coilovers – Audi A3\/S3 8V AWD 2014–2019 – MR-CDK-AA314-AW-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for Audi A3 and S3 8V AWD models with a stronger emphasis on street comfort than Megan’s more performance-oriented coilover setups. Rubber-isolated front top mounts and reuse of the factory rear mounts help reduce additional road noise and harshness, while the slightly increased spring rates and sport-tuned damping still provide improved body control and handling response.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit uses monotube dampers with full-length ride-height adjustment, allowing vehicle height to be altered without relying solely on spring preload. Front and rear spring rates are 8 kgf\/mm and 6 kgf\/mm respectively, with 32-way simultaneous compression and rebound damping adjustment.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Usage Notes:\u003c\/strong\u003e Megan Racing USA lists this kit for \u003cstrong\u003eAudi A3 and S3 AWD models from 2014–2019\u003c\/strong\u003e. Megan Racing Japan lists the A3 8V as \u003cstrong\u003e2015–2020\u003c\/strong\u003e and the S3 as \u003cstrong\u003e2014+\u003c\/strong\u003e, showing a regional model-year difference. Megan Racing states that its published application years are based on US-market vehicles, so Australian build date, chassis and quattro\/AWD specification should be confirmed before ordering. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and states that correct installation and setup are the installer’s responsibility. Components may not be completely torqued out of the box, so all hardware should be checked and correctly torqued during installation. Megan Racing provides a one-year warranty against manufacturer defects subject to its warranty terms.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54826995712279,"sku":"MR-CDK-AA314-AW-EU","price":944.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-aa314-aw-eu-1.jpg?v=1787894480"},{"product_id":"megan-racing-audi-a4-b9-a5-f5-53mm-coilovers-mr-cdk-aa517-53-eu","title":"Megan Racing Euro I Coilovers – Audi A4 B9 \/ A5 F5 2017–2021 – 53mm Front Strut – MR-CDK-AA517-53-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for Audi A4 B9 and A5 F5 models with an emphasis on maintaining street comfort while adding adjustable ride height and damping control. Rubber-isolated front top mounts and reuse of the factory rear upper mounts help limit additional road noise and harshness, while increased spring rates and sport-tuned damper valving provide improved chassis control for more spirited driving.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe monotube dampers use full-length ride-height adjustment, allowing vehicle height to be changed without relying solely on spring preload or sacrificing shock stroke. This 53 mm front-strut version uses 10 kgf\/mm front and 8 kgf\/mm rear spring rates with 30-way simultaneous compression and rebound damping adjustment.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Installation Notes:\u003c\/strong\u003e This exact kit is intended for vehicles using the \u003cstrong\u003e53 mm front strut configuration\u003c\/strong\u003e. A separate \u003cstrong\u003e48 mm version (MR-CDK-AA517-48-EU)\u003c\/strong\u003e exists, so the vehicle’s front strut diameter should be physically confirmed before ordering. The kit includes the Audi A4 Allroad application according to Megan Racing USA. Vehicles equipped with \u003cstrong\u003eDDC\/electronic damping require non-DDC rear shock mounts to be sourced separately from an OE or third-party supplier\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and states that correct installation and setup are the installer’s responsibility. Megan also notes that its application years are based on US-market vehicles and may differ from other markets, so Australian build date, chassis and suspension specification should be confirmed before purchase. The kit carries Megan Racing’s 1-year warranty against manufacturer defects, subject to its warranty terms. \u003c\/p\u003e\n","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54826998956311,"sku":"MR-CDK-AA517-53-EU","price":944.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-aa517-53-eu_2.jpg?v=1787894553"},{"product_id":"megan-racing-audi-a4-a5-s4-s5-coilovers-mr-cdk-aa509-eu","title":"Megan Racing Euro I Coilovers – Audi A4 B8 \/ A5 8T\/8F \/ S4 \u0026 S5 – MR-CDK-AA509-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for the Audi A4, A5, S4 and S5 platform with an emphasis on retaining street comfort while adding adjustable ride height and damping control. Rubber-isolated front top mounts and reuse of the factory rear mounts help limit additional noise and harshness, while increased spring rates and sport-tuned damper valving provide greater chassis control for spirited driving.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe monotube dampers use full-length ride-height adjustment so vehicle height can be altered without relying solely on spring preload or unnecessarily reducing available damper stroke. The kit uses 12 kgf\/mm front and 5 kgf\/mm rear spring rates, with 32-way simultaneous compression and rebound damping adjustment.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Installation Notes:\u003c\/strong\u003e Megan Racing lists this kit across the B8-generation A4\/S4 and 8T\/8F A5\/S5 platforms, including both FWD and AWD\/quattro A4\/A5 applications. Published model years differ slightly between Megan Racing USA and Japan because Megan notes that its US catalogue years are based on US-market vehicles. Australian chassis, body style and suspension specification should therefore be confirmed before ordering. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and states that correct installation, setup and final hardware torque are the installer’s responsibility. Components may not be completely torqued out of the box. Professional installation and a wheel alignment after installation are recommended.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54826999546135,"sku":"MR-CDK-AA509-EU","price":944.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-aa509-eu-1.jpg?v=1787894576"},{"product_id":"megan-racing-audi-a4-b5-fwd-coilovers-mr-cdk-aa496fd-eu","title":"Megan Racing Euro I Coilovers – Audi A4 B5 FWD 1996–2001 – MR-CDK-AA496FD-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for the Audi A4 B5 with an emphasis on maintaining street comfort while adding adjustable ride height and damping control. Rubber-isolated front top mounts and reuse of the factory rear mounts help reduce additional road noise and harshness, while increased spring rates and sport-tuned damping provide improved chassis control for more responsive driving.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit uses monotube dampers with full-length ride-height adjustment, allowing vehicle height to be changed without relying solely on spring preload or reducing available damper stroke. Spring rates are 10 kgf\/mm front and 6 kgf\/mm rear, with 32-way simultaneous compression and rebound damping adjustment.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Installation Notes:\u003c\/strong\u003e This exact kit is specifically for \u003cstrong\u003efront-wheel-drive Audi A4 models only\u003c\/strong\u003e and is \u003cstrong\u003enot compatible with quattro\/AWD applications\u003c\/strong\u003e. Megan Racing notes that its application years are based on US-market vehicles, so Australian build date, chassis and drivetrain should be confirmed before ordering. Professional installation and a wheel alignment after installation are recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e. Correct installation, setup and final hardware torque are the installer’s responsibility, and Megan notes that components may not be completely torqued out of the box. The kit carries a 1-year limited warranty against manufacturer defects subject to Megan Racing’s warranty conditions.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54826999939351,"sku":"MR-CDK-AA496FD-EU","price":944.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-aa496fd-eu-1-scaled.jpg?v=1787894596"},{"product_id":"megan-racing-audi-a4-b6-b7-coilovers-mr-cdk-aa402fd-eu","title":"Megan Racing Euro I Coilovers – Audi A4 B6\/B7 FWD \u0026 quattro 2002–2008 – MR-CDK-AA402FD-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for the Audi A4 B6\/B7 with a stronger focus on street comfort while still providing adjustable ride height and damping control. Rubber-isolated front top mounts and reuse of the factory rear mounts help reduce additional road noise and harshness, while the sport-tuned dampers provide improved body control and a more responsive suspension feel.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit uses monotube dampers with full-length ride-height adjustment, allowing vehicle height to be changed without relying solely on spring preload. Megan Racing’s current official specification lists 12 kgf\/mm front and 12 kgf\/mm rear spring rates with 32-way simultaneous compression and rebound damping adjustment.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Installation Notes:\u003c\/strong\u003e Megan Racing directly lists this kit for both \u003cstrong\u003eFWD and AWD\/quattro Audi A4 models from 2002–2008\u003c\/strong\u003e. Megan Racing’s Japanese catalogue independently confirms the same A4 2002–2008 application. Manufacturer application years are US-market based, so Australian build year\/chassis should still be confirmed before ordering. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and states that correct installation, setup and final hardware torque are the installer’s responsibility. Megan also notes that components may not be completely torqued out of the box. Professional installation and a wheel alignment after fitment are recommended.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54827001086231,"sku":"MR-CDK-AA402FD-EU","price":944.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-aa402fd-eu-1.jpg?v=1787894643"},{"product_id":"megan-racing-audi-a6-c7-coilovers-mr-cdk-aa612-eu","title":"Megan Racing Euro I Coilovers – Audi A6 C7 FWD \u0026 quattro 2012–2016 – MR-CDK-AA612-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for the Audi A6 C7 with an emphasis on retaining street comfort while adding adjustable ride height and damping control. Rubber-isolated front top mounts and reuse of the factory rear mounts help reduce additional road noise and harshness, while increased spring rates and sport-tuned damper valving provide improved chassis control for more responsive driving.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit uses monotube dampers with full-length ride-height adjustment, allowing vehicle height to be changed without relying solely on spring preload. Spring rates are 12 kgf\/mm front and 6 kgf\/mm rear, with 32-way simultaneous compression and rebound damping adjustment. Megan Racing Japan additionally specifies 200 mm front and 220 mm rear spring lengths.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Installation Notes:\u003c\/strong\u003e Megan Racing USA directly lists this exact kit for \u003cstrong\u003eAudi A6 2012–2016 in both FWD and AWD\/quattro configurations\u003c\/strong\u003e. Megan Racing Japan lists the same SKU for the broader \u003cstrong\u003eC7 2012–2018\u003c\/strong\u003e range. Because Megan Racing states that its US application years are based on US-market vehicles, exact Australian build date, chassis and suspension specification should be confirmed before ordering. Use \u003cstrong\u003e2012–2016\u003c\/strong\u003e as the confirmed application range; compatibility with 2017–2018 facelift vehicles should be verified before purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Notice:\u003c\/strong\u003e Megan Racing classifies its suspension products as \u003cstrong\u003eoff-road use only\u003c\/strong\u003e. Correct installation, setup and final torque are the installer’s responsibility, and Megan notes that components may not be completely torqued out of the box. The kit carries a 1-year warranty against manufacturer defects, subject to Megan Racing’s warranty terms.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Default Title","offer_id":54827013046551,"sku":"MR-CDK-AA612-EU","price":944.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-aa612-eu-1.jpg?v=1787895192"},{"product_id":"megan-racing-audi-s4-b5-euro-i-coilovers-mr-cdk-as497-eu","title":"Megan Racing Euro I Coilovers – Audi S4 B5 1997–2001 – MR-CDK-AS497-EU","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing Euro I Series coilovers are designed for the Audi S4 B5 with an emphasis on maintaining a usable street ride while providing substantially increased suspension control and adjustability. Rubber-isolated front top mounts and reuse of the factory rear mounts help limit additional road noise and harshness, while the higher spring rates and sport-tuned damping provide a firmer, more responsive setup for performance-oriented driving.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe kit uses monotube dampers with full-length ride-height adjustment, allowing ride height to be changed independently of spring preload while retaining usable damper stroke. Megan Racing specifies 16 kgf\/mm front and 10 kgf\/mm rear spring rates with 32-way simultaneous compression and rebound damping adjustment.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Installation Notes:\u003c\/strong\u003e This SKU should be treated as an \u003cstrong\u003eAudi S4 B5 application\u003c\/strong\u003e. Megan Racing USA titles the product for the S4 1997–2001, while established Megan suppliers including ECS and FR Sport independently identify \u003cstrong\u003eMR-CDK-AS497-EU as the B5 S4 coilover kit\u003c\/strong\u003e. Exact model year varies by market, so chassis should be confirmed before ordering rather than relying on year alone. Professional installation and a wheel alignment after installation are recommended. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Notice:\u003c\/strong\u003e Megan Racing specifies its suspension products for \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and places responsibility for correct installation, setup and final hardware torque on the installer. The kit carries a 1-year warranty against manufacturer defects, subject to Megan Racing's warranty terms.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":54827017535767,"sku":"MR-CDK-AS497-EU","price":944.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-as497-eu-1.jpg?v=1787895338"},{"product_id":"megan-racing-coilovers-vw-golf-gti-mk7-55mm-mr-cdk-vwg755","title":"Megan Racing Euro II Coilovers – Volkswagen Golf \/ GTI Mk7 2014–2021 – 55 mm – MR-CDK-VWG755","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing MR-CDK-VWG755 Euro II Series coilovers provide adjustable ride height and damping for compatible Volkswagen Golf and GTI Mk7\/Mk7.5 models. The Euro II setup uses a more road-focused spring and damper calibration while retaining the adjustment needed for performance street use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe monotube dampers provide 32 levels of simultaneous compression and rebound adjustment. Separate spring-perch and shock-length adjustment allows ride height to be changed while helping retain usable suspension travel. The kit uses 7 kgf\/mm front and 6 kgf\/mm rear springs manufactured from SAE 9254 cold-wound steel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Installation Notes:\u003c\/strong\u003e This kit is specifically for Mk7\/Mk7.5 Golf and GTI models equipped with \u003cstrong\u003e55 mm front struts and multi-link rear suspension\u003c\/strong\u003e. It does not suit vehicles with 50 mm front struts or torsion-beam rear suspension. Confirm the front strut diameter and rear suspension layout before ordering, as Australian model specifications can vary by engine, trim and build date. Professional installation and a four-wheel alignment are recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Notice:\u003c\/strong\u003e Megan Racing specifies this product for \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and provides a 1-year limited warranty against manufacturer defects.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":55094755295511,"sku":"MR-CDK-VWG755","price":989.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-vwg755-1.jpg?v=1788246391"},{"product_id":"megan-racing-coilovers-vw-golf-gti-mk7-50mm-mr-cdk-vwg750","title":"Megan Racing Euro II Coilovers – Volkswagen Golf \/ GTI Mk7 2014–2021 – 50 mm – MR-CDK-VWG750","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing MR-CDK-VWG750 Euro II Series coilovers provide adjustable ride height and damping for compatible Volkswagen Golf and GTI Mk7\/Mk7.5 models equipped with 50 mm front struts. The Euro II setup combines a road-focused spring and damper calibration with the adjustment required for performance street use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe monotube dampers provide 32 levels of simultaneous compression and rebound adjustment. Separate spring-perch and shock-length adjustment allows ride height to be changed while helping retain usable suspension travel. The kit uses 7 kgf\/mm front and 6 kgf\/mm rear springs manufactured from SAE 9254 cold-wound steel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Installation Notes:\u003c\/strong\u003e This kit is specifically for compatible Golf and GTI Mk7\/Mk7.5 models with \u003cstrong\u003e50 mm front struts\u003c\/strong\u003e. It does not suit vehicles fitted with 55 mm front struts. Measure or otherwise confirm the factory front-strut diameter before ordering, as Australian specifications can vary by engine, trim and build date. Professional installation and a four-wheel alignment are recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Notice:\u003c\/strong\u003e Megan Racing specifies this product for \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and provides a 1-year limited warranty against manufacturer defects.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":55094756507927,"sku":"MR-CDK-VWG750","price":989.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-vwg750-1.jpg?v=1788246408"},{"product_id":"megan-racing-coilovers-vw-golf-mk1-rabbit-74-83-mr-cdk-vwr74","title":"Megan Racing Euro II Coilovers – Volkswagen Golf Mk1 \/ Rabbit 1974–1983 – MR-CDK-VWR74","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing MR-CDK-VWR74 Euro II Series coilovers provide adjustable ride height and damping for compatible Volkswagen Golf Mk1 and Rabbit models. The monotube design is intended to improve suspension response, body control and stance for performance street or track-oriented applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe dampers provide 32 levels of simultaneous compression and rebound adjustment. Full-length adjustment allows ride height to be changed while helping retain usable suspension stroke. Camber-adjustable pillowball front top mounts provide additional front alignment control, while the kit uses 5 kgf\/mm front and 3 kgf\/mm rear springs manufactured from SAE 9254 cold-wound steel.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Installation Notes:\u003c\/strong\u003e Megan Racing lists this kit for the North American Volkswagen Rabbit from 1974–1983; Golf Mk1 applications should be confirmed against the vehicle chassis and suspension configuration before ordering. Professional installation and a four-wheel alignment are recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Notice:\u003c\/strong\u003e Megan Racing specifies this product for \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and provides a 1-year limited warranty against manufacturer defects.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":55094757785879,"sku":"MR-CDK-VWR74","price":989.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-vwr74-1.jpg?v=1788246422"},{"product_id":"megan-racing-coilovers-vw-passat-nms-2012-2018-mr-cdk-vwp12","title":"Megan Racing Euro II Coilovers – Volkswagen Passat NMS 2012–2018 – MR-CDK-VWP12","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing MR-CDK-VWP12 Euro II Series coilovers provide adjustable ride height and damping for compatible Volkswagen Passat NMS models. The monotube construction is designed to improve handling response, body control and stance while retaining the adjustment required for performance street use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe dampers provide 32 levels of simultaneous compression and rebound adjustment. Full-length adjustment allows ride height changes while helping retain usable suspension stroke. Camber-adjustable pillowball front top mounts provide additional front alignment control, and the kit uses 7 kgf\/mm front and 6 kgf\/mm rear SAE 9254 cold-wound steel springs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Installation Notes:\u003c\/strong\u003e This kit is intended for the \u003cstrong\u003eNorth American-market Passat NMS platform\u003c\/strong\u003e, not every international Passat of the same model years. Confirm chassis and Australian vehicle specification before ordering. Professional installation and a four-wheel alignment are recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Notice:\u003c\/strong\u003e Megan Racing specifies this product for \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and provides a 1-year limited warranty against manufacturer defects.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":55094758506775,"sku":"MR-CDK-VWP12","price":989.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-vwp12-1.jpg?v=1788246437"},{"product_id":"megan-racing-coilovers-vw-golf-gti-mk5-mk6-jetta-mr-cdk-golf5","title":"Megan Racing Euro II Coilovers – Volkswagen Golf GTI Mk5\/Mk6 \u0026 Jetta 2011–2017 – MR-CDK-GOLF5","description":"\u003cp\u003e\u003cstrong\u003eMegan Racing MR-CDK-GOLF5 Euro II Series coilovers provide adjustable ride height and damping for compatible Volkswagen Golf GTI Mk5, Golf GTI Mk6 and Jetta models. The monotube system is designed to improve handling response, body control and stance for performance street use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe dampers provide 32 levels of simultaneous compression and rebound adjustment. Full-length adjustment allows ride height changes while helping retain usable suspension stroke. Independent rear spring-height and shock-length adjustment and camber-adjustable pillowball front top mounts provide additional setup control. Spring rates are 7 kgf\/mm front and 5 kgf\/mm rear.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment \u0026amp; Installation Notes:\u003c\/strong\u003e This kit requires \u003cstrong\u003e54.5 mm front lower strut brackets\u003c\/strong\u003e. Compatible applications include Golf GTI Mk5 2006–2009, Golf GTI Mk6 2010–2014 and Jetta 2011–2017, excluding Jetta S and SE models. Confirm the front-strut bracket diameter before ordering. Professional installation and a four-wheel alignment are recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer Notice:\u003c\/strong\u003e Megan Racing specifies this product for \u003cstrong\u003eoff-road use only\u003c\/strong\u003e and provides a 1-year limited warranty against manufacturer defects.\u003c\/p\u003e","brand":"Megan Racing","offers":[{"title":"Title","offer_id":55094759620887,"sku":"MR-CDK-GOLF5","price":989.1,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0876\/5695\/6183\/files\/mr-cdk-golf5-1.jpg?v=1788246453"}],"url":"https:\/\/fujieuroparts.com.au\/collections\/coilovers.oembed?page=2","provider":"Fuji Euro Parts","version":"1.0","type":"link"}